JVC kw-nt500hdt will not eject disk

Buy a map ?

stop playing that disc or cassette and use another one,also get a cleaner for the cd or tape player

Hello Connie, Thank you for your question.
The JVC unit you have installed can detect when the car is in motion. If you are stuck in the DEMO mode start the vehicle and drive a short distance, once the system detects motion it should remove itself from the DEMO mode. I hope this helps =)

when you hit the eject button try tapping the top above the disk drive. it may be somewhat stuck. if that doesnt fix it you might have a broken belt or a belt may have come off in it. the belt controls the movement of the drive in and out

is eject / insert cd function. is disk clean and work in other player? next is to open upper cover and clean optical lens area including the lens itself you can clean that using cotton badge. slow not to miss align that lens.

www.jvc.co.nz/assets/pdf-manual/KW-AVX826.pdf

You will nee a KS-U20 Lead from JVC to make videos work.
Then use the AV to view them.

HI, this is the result of a failed optical assembly. you can confirm by inserting a cleaning disk. if this continues after the cleaning attempt, have the optics replaced.

It wasn't a car cd player, but a component for a stereo.  I took off the case and shook the player until the disc dropped out.  We plan to replace the player, so no further help is needed.  Thank you for getting back to me so quickly.

What error are you receiving? Usually you will receive an error code when something like that happens. aka "NO DISK" "DISK ERROR #"

Try this: Hold down "select" while holding down the "attention" button for more than 2 seconds. This should reset your cd player.

Might fix your issue.

Here's your manual.

Consult http://resources.jvc.com/Resources/00/00/94/GET0246-001A.pdf