Re: How do I access the battery? And how do I recharge...
Battery is Usually located under the seat of Most Motorcycles. Remove Battery and Get a 2amp trickle charger for both Wet and Gel Cell batteries Fallow Normal Charging inst.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I know this is almost a year old, but why can't you access the batteries? How have you been using the headphones without either recharging or simple using regular batteries? The batteries that came with the unit are not proprietary and any pair of AA batteries will work. I haven't used the Sony batteries that came with the headphone for years, won't recharge anymore. I have been using Sanyo eneloop AA rechargeable batteries ever since and keep a fresh pair of batteries recharged at all times. And it seems like they go on for ever, but the time between replacing the batteries is about once a month.
If you have the type of controller that has rechargable batteries, then just recharge them. If not, then just replace the batteries. You will have to take the rubber sleave off if you have one, to access the battery compartment. Then just replace the "AA" batteries in it. ^^ Good luck.
The battery is inside the shaver body. You must remove the rubberized grip to access the screws to disassemble it. You can not use any rechargeable battery. The battery is lithiun ion. The correct battery is available at shaveroutlet.com. See link below
The battery is dead. Recharging (or replacing) the battery will remedy those symptoms you describe. Recharging the battery is a lot cheaper if you have access to a charger or can remove the battery and can take it to a service station for recharging.
"Normal" batteries are 1.5 Volts per "Cell" However Ni-Cads, rechargeables, each "Cell" is only 1.2 Volts. So the rechargeables simply may not work... If they do work, then there is NO reason why not.
restart your laptop press F10 to access the bios setup page. Now scroll to battery calibration tab follow these steps
1 Recharge
2- Discharge
3- Recharge
the (Access) in the screen refer to one of this problem, the lens mechanism is unable to start due to plastic broken parts in it or dust, or battery poor power, use a rechargeable battery over 1200 uAh of power
×