At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How far should a 2004 chevy malibu be driven after a...
No sure but when I had the problem the dealer told me they need to drive the car for about 50 miles to allow the computer to cycle through all the programs. Hope this helps.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This code has to do with the EVAP system and not the fuel pressure. The first thing to do is make sure your gas cap is tight. If this does not solve the problem, you will have to have the truck diagnosed by a qualified technician with a proper scan tool.
There is a couple ways to do this, either clear it with a scanner(if you own one) or disconnect the battery negative side of terminal and wait thirty seconds then reattach.Be sure to write down your radio code just in case if you still have the stock radio and it has theftlock...HOPE I HELPED!!!
you might try unhooking the battiey for 20min both + and - posties cuz that will force the computor to have to resest only if you have addressied the fuel pressure problem which taht would most likly be your filter which isn't all that much
2004 chevy malibu crank no start/ scan computer found code b2930, basicly computor forgot the chip inbedded in key,turned on ign for ten minutes cycled key and car started has been fine for two(2) days
×