- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
they r known 4 shady processer boards not hard to solve call pts electronics give model #will send u new board around 120$ not diffucult to instal must discharge cicutrt then ground install new board or may short micr precesses
for testing, place the green crt board on the red crt and see if the red crt lights up and the green does not. If the green does not light up then check for 200+ volts on the collector or the output transistor. if you have that kind of voltage thee then check for an open resistor. If not then make sure the transistor is not shorted
The steps that need to be taken on fixing this set start with the standby voltage requirement. Is it there? next is the low voltage loop from the transformer, also a requirement for the set to come on. ...accordianman