How do I turn off the time saver option? - Hotpoint Ariston Aquarius WD420 Front Load All-in-One Washer/Dryer

The Energy Saver Mode deactivates the display to reduce energy
consumption.
To Activate the Energy Saver Mode:
1. Press and hold OPTIONS for 3 seconds. "Energy saver on."
will appear in the upper text area.
2. The setting will be activated after 5 minutes.
Any cooking function may be used with the range in Energy
Saver Mode by simply selecting the desired function.
To Deactivate the Energy Saver Mode:
1. Press and hold OPTIONS for 3 seconds. "Energy saver off."
will appear in the upper text area.
2. The clock will reappear in the display, and the range can be
operated as usua

Control panel Power options adjust time for monitor time to sleep you can adjust 5 minutes to never the option available same can be done for hard disk. This is necessary as even monitor is active and when hard disk goes to sleep you may end up in same situation
Alternatively you can activate screen saver by
right click on desktop, settings screen saver choose screen saver set time to activate screen saver.

Unless you have already done so, check the power saver options in the control panel. You may have to tweek the timings to make sure power save options are not cutting in too early.

I don't know which windows operating system you are using but generally you will find the details in the Control Panel.

When you set the screen saver there will be an option for the computer to be locked after like 15 minutes idleness. You need to disable it to keep your screen saver on at all times. It is either in your graphic properties settings about screen savers or the power options you can open with a button on the dialog box of screen saver settings or you can open the power options from control panel. If you tell me which operating system you are using I will show you the detailed steps.

The option is under Screen saver options or there is an idle time shut off selection under Power Saver options as well. When you select your screen saver there is are specific options to customize how it shows and how long before it activates. Some screen savers have more options than others.

Check the power settings. Start/Control Panel/Power Options. There is a setting separate from the screen saver to turn off the screen in the Power Options control panel. DVD playback overrides the power options settings.

Hello ,
Do you have / use a screen saver or have you set some power saving option in Control Panel's Power Options. Like turning off the hard disk after xxx amount of idle time?
Go to Control Panel >>Appearance and Themes >> next select Display >> look at Screen Saver tab.

Is it set to power off the hard drive after xx amount of idle time ?
Control Panel >> Performance and Maintenance >> Power Options.

Right-Click the My Computer icon on desktop. Select Properties.
Next, select Advanced. Look for a block that says Startup and recovery. Press the settings button.
In System failure section, turn off (un-check) Automatically restart. Apply change.

check ur screen saver, may be the screen saver has been set for the option to chose the pink color.
if it works when u use it the screen is OK...
check ur Power option in Screen saver....

On most copiers, you can't totally disable it... it's all part of that "energy star" rating thing. It's annoying, i know.

go to screen saver optentions then go to power options set "never turn off" hard disk/monitor option ,