IBM E54 Display in Red

Your television have color problem.That symptom is cause of loose connection or cold solder in chroma section and color output driver transistor of CRT board of your television.You can fix that problem by resoldering the chroma section and crt socket section of your TV.first thing to do is open or remove the back cover of your TV,then you can see the crt board connected to picture tube.Resolder that parts,specially the color output transistor the red,green and blue driver.Resolder also the chroma section.You can see the jungle ic,thats the color ic.Make sure that there's no short circuit when soldering the PCB board.After the resoldering turn on the TV and check if color is normal.Thanks..

Your monitor might be defected during the manufacturing.Try contacting your dealer or salesperson.Avail free services if the time period hasn't exceeded guarantee.

maybe he need driver for your monitor to be operational. check your device manager if your monitor didnot recognize. You will need to install the required driver software for this.

Hi,
Horizontal IC kharap hai apko moniter repair karna hoga..

vertical ic tda9302 ic faulty or near this ic one diode faulty pls check it

check your power cable if it works properly. Try to connect it to another switch. Tighten the connector to your computer.
I hope this will help you out. =)

1.To replace TIP122 and it's related transisters (A733,C945) tracing TIP122 pins
2.Change Flyback caps
3.Open OSD select ZOOM Option and press 20 sec OPEN SERVICE MODE decrease the Width option &save it
4.Switch off the monitor

IF these solution was usefull pl appreciates rating

1. first replaced the TIP 122 fet. back side of lot.

2. change the 424j / 1600v pf.

3. IRF 630 ( after power output section )

my monitor IBM e54 have a problem its like the right button from the monitor automatically activates. so everytime i work contrast box appears. how can i solve this problem?

please upgrade your graphics card if the problem still occurs then upgrade your os drivers...