How can i hook up my 12 to my television - Hifonics Car Audio & Video

setup old Sharp TV (CRT) - Entertainment - Tom's Hardware

www.tomshardware.com > Forum > Entertainment

Tom's Hardware Guide
Dec 12, 2015 - 4 posts - ‎4 authors
I have inherited a 10-year old Sharp TV (CRT) but cannot setup with ... You might need to run an HDMI to DVI cable, and then source the audio ...

Tutorial: How to hook your computer to a CRT Tv - YouTube

? 12:24
https://www.youtube.com/watch?v=kub0r9julZs
Feb 25, 2012 - Uploaded by SecondHandHunter
Tutorial: How to hook your computer to a CRT Tv ..... So somehow you need to convert the VGA to Component or RGB scart and that will give ...

cable is ok but a.g.c volt .12 not poper voltage

12+12=24

replace the scaler board. Worked for me today 1/1/12

Check in TV menu/set-up and look for save user preferences or similar. Just a possibility.

You need to go into the set up menu for the channels and change it from air to cable then do a scan channels.

Replaced the two convergence ICS first,than ur resistors will read 3.9 Ohms,the one is not must change.

As of 6/12/09, the over-air broadcast signals went to digital (ATSC) only. Your set does not have and ATSC tuner so it can not receive the new digital signals. The converter box converts the ATSC signals to the NTSC channel 3 or 4.

Dan

you need to buy a chep universal 12 volt adapter

Was this problem resolved?