Sony t10 backlight not working

Hello,

Yes, the backlight is a separate part. It can be removed from the LCD and replaced.
The following video shows how to replace the backlight in a Sony camera.

http://www.desmontalo.com/?p=275

Check in this links...

- Charger -->> Battery-Charger-Cybershot-DSC-T10/dp/B000NOXCLM
- Battery -->> Sony-InfoLithium-Rechargeable-Battery-Digital/dp/B0001AU7SY

Hope this helps.

You can download the manual and more from the manufacturer's web site at
http://esupport.sony.com/US/perl/model-documents.pl?mdl=DSCT10

My dsc-t10 camera shows e:62:10 Problem with the Sony Cyber-shot DSC-T10 Digital Camera

You can buy it online: http://www.ownta.com/sony-dsc-t9-t10-digital-camera-repairing-lcd-screen-for-replacement.html

Fix by yourself with opening tool.

Hi, I don't know if this applies to the dsc-d10, but this is a common fault on the DSC-T1 and is due to a faulty CCD. Try taking it to a sony shop, and ask if they will send it to sony for a free repair (mention to them it is a common fault, and that you expect a free repair). They will send it off for you, and in a few days you will get your workingcamera back.

As you've purchased the Camera in the US, the Warranty will be applicable only in the US.

You have to SEPTEMBER 30th, 2008 to do this!!!!!!

This is a known issue with the cameras. go to:
http://esupport.sony.com/US/perl/select-system.pl?PRODTYPE=7&NAVDISP=di

Enter your camera model. Go to:
Important Notice About Your Sony Product

and follow the instructions. Sony will email you a UPS shipping label. Ship the camera back to them at their expense. They will fix it and ship it back to you for free.

Until September 30, 2008, Sony will repair, free of charge, affected products exhibiting the above-mentioned symptom where it is caused by the image sensor device. Sony will also cover the cost of shipping and handling from and to addresses within the United States and US Territories for service to correct this issue.

Hi there, I now have two Cybershot DSC-T10 with broken LCD's. The best remedy that I have found is buy a parts camera with a good LCD on EBAY. You can get the whole camera for way cheaper than you can buy a new LCD.

Hello, this error message means that there is an melfunction in angular velocity sensor, peripheral cicuits. Simply speaking steady shot function does not work well. Please contact nearest Sony Dealer. Best regards, Arpi