The part you need is 316111202. Any good appliance parts store or website should be able to locate one for you. Your sensor should have about 1100 ohms at room temperature. Check the connector first before replacing sensor. They are notorious for causing problems. The only things that control temp is the sensor and the main board. If the sensor and wiring check good, then the main board is defective.
SOURCE: Door locked after cancelling self clean option
Open the door. In the upper left corner, press and hold the door switch (the one that controls the inside light). Start a self clean cycle and wait for lock motor to engage. When the lock stops moving it should be in the unlocked position. Press cancel to stop the self clean.
If you need more assistance let me know.
Good luck!
SOURCE: F10 lights on at the
Open the bottom pan drawer, the number is on the leg.
Testimonial: "Thanks you! Now I can order it,"
65 views
Usually answered in minutes!
×