Question about Dacor Ovens

1 Answer

Dacor wall oven MORD230 cont'd beeping,disconnecting power to unit did't work,error code 01 appear on display

Posted by Anonymous on

Ad

1 Answer

Richard C Cohen

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Dacor Expert
  • 318 Answers

Hello. The error means there is a shorted key on the keypad. The part number you will need is 701044-02, called "membrane panel assembly, black". The main board, if needed, is 101991, called LED display module. Hope I helped you!

Posted on Aug 21, 2015

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does a C76 or C77 error code mean on a Dacor wall oven?


Page 9-48 in technical manual excerpts at the link below:

http://www.uncleharrywizard.com/nephewclub/WizardRange/dacor/dacor-wall-oven.pdf


http://www.uncleharrywizard.com/nephewclub/WizardRange/dacor/dacor-wall-oven.pdf


It says to call for service (by a technician). (I am only reading it from the document - I am not a technician.)

It says to replace glass/touchpad assembly.
It says wrong or unrecognized diode configuration.

Apr 03, 2018 | Dacor Ovens

1 Answer

My Dacor oven keeps beeping and flashing PRB. How do I stop the beeping?


Most unwanted beeping on Dacor products are due to a bad touchpad... Use your model # and start looking for a replacement , by touchpad I mean a part something like this one: Dacor Touchpad 62678B

Jul 12, 2016 | Dacor Epicure 30" Double Wall Oven,...

1 Answer

I have a frigidaire wall oven showing E r r f1 what is wrong no manual


Typically error code F1 could indicate a variety of issues. The wall oven could possibly have a runaway temp (higher than normal temps), shorted keypad, faulty EOC (Electronic Oven Control) or, display wire harness missing/not connected. Usually, this code means to replace the EOC. You may be able to reset the wall oven by disconnecting the power to the unit for up ten minutes. Usually this will clear most false error codes. You can disconnect power by either unplugging the unit or flipping the circuit breaker off and back on. If resetting the unit proves to be ineffective, I would recommend contacting a professional to move forward accurately

Nov 19, 2012 | GE Ovens

1 Answer

I have a Dacor ECS130 and when we turn it off the F1 code comes up and it beeps forever. i tried uplugging the membrane switch from the control/clock module (with the power off) and there is no F1...


Hi


Thanks for using FixYa. Error F1 in your Dacor Oven indicates element relay circuit failure. To resolve this issue the control board should be replaced as it has gone bad. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 26, 2010 | Ovens

1 Answer

Dacor single oven flashes an F2 error code and won't stop beeping!!!


This is from manufacture service manual:

-F2- Alarm Heating Mode High Temperature
Is activated when the ERC senses a runaway heat condition or when the temperature exceeds
“runaway limits”. The ERC will beep until the cancel or another function is selected. If the alarm
repeats the F2 alarm check the oven sensor and wiring after fi rst checking for a stuck relay. If alarm
goes away verify the oven will complete a clean cycle without any type of failure.
Another words the problem with oven sensor or relay board.

I’m happy to help further over the phone at https://www.6ya.com/expert/vitaliy_f406165329c75ede

Oct 26, 2008 | Dacor MCS130 Millennia Electric Single...

1 Answer

PCS 130 Keypad


Dacor probably won't cover anything. F1 is either the touch pad or ERC (clock). If it stops beeping when the touch pad is uplugged from the ERC then the touch pad is the problem if not it is the ERC. Call Dacor Customer service to get a price on the parts and to voice your displeasure.

May 22, 2008 | Dacor PCS130 Preference Electric Single...

2 Answers

Dacor error codes


HI. the F-1 code is a System Watchdog Circuit failure code.

Press "Cancel", if beeping continues after 30 seconds, replace the main control board (also called clock or ERC).

Concerning the F-5 code. This is an oven temp sensor failure code. have it replaced asap. ((Check the wiring leading to and from the control and sensor for cracks and fouled structure. if the wiring is bad, replace the harness as well)),

Apr 25, 2008 | Dacor ECS127 Epicure Electric Single Oven

1 Answer

Dacor cps130 wall oven f1 error


According to the manual, this is an element relay circuit failure. Call the tech.

Dec 04, 2007 | Ovens

3 Answers

Display reads U60 Cooling Fan - oven won't heat


The code is telling you that the oven has sensed a fault in the coling fan circuit of the upper oven. Dacor has had a few problems with the cooling fans in these new ovens since theyve been out, so most likely you will have a bad fan motor. If that is the case, be prepared to have the repair person have to pull the oven out of the wall to get to it and change it. If its a realy board problem (less likely) than that can be changed from the front. Call up Dacor and find an authorized servicer in your area since it will still be under warranty. Good Luck!

Feb 05, 2007 | Dacor Millennia MOV130 Electric Single...

Not finding what you are looking for?
Ovens Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dacor Ovens Experts

Paul Bade

Level 3 Expert

1666 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

ray gallant

Level 3 Expert

71004 Answers

Are you a Dacor Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...