- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the flashing amber status light is normal indicating data going from computer to printer.the flashing paper light indicates a paper jam or out of paper. A sensor maybe not working properly or sticking. If your model number ends in a D check
Canon IP 2000 / reset
1. Turn off printer 2. Hold down Resume button and press Power button. 3. Keep holding down Power button and let Resume button go. 4. Press Resume button 2 times then let BOTH buttons go. 5. Green lights will flash and then stop blinking. 6. When green lights are solid, press the Resume button 4 times. 7. Press the Power button and the printer should turn off, if not, press the Power button once more. 8. Your printer should respond as normal..
You will see 3 led lights on the printer. They will blink continously if:
if the print cartridge status light is flashing
-- check if the top cover is open, Close the top cover. -- there may be a problem with a print cartridge 1. Verify that the correct print cartridges are installed. 2. Check if a print cartridge is low on ink or improperly installed.
if the resume light is flashing
-- the printer may be out of paper 1. Place paper in the In tray. 2. Press the Resume button on the front of
-- the printer may be ready to print the second side of a two-sided document 1. Follow the onscreen instructions for printing the second side. 2. Press the Resume button.
if the power light is flashing
-- the printer is preparing to print -- The light stops flashing when the printer has received all data.
if all lights are flashing
-- the printer may need to be restarted 1. Press the Power button to turn off the printer, then press the Power button to restart the printer.Proceed to step 2 if the lights continue to flash. 2. Press the Power button to turn off the printer. 3. Disconnect the printer from the power source. 4. Reconnect the printer to the power source.Press the Power button to turn on the printer.
I have a epson stylus c65 printer. My printer is keep flashing the two red light. The out of paper and the out of ink. what do I have to do to stop the problem. The two red light is keep on flashing alternately