Question about Texas Instruments TI-86 Calculator

Ad

Texas Instruments TI-86 Statistics How-To Information
The following instructions should allow you to calculate the mean and standard deviation using a TI-86 calculator.

- Press STAT
- Select EDIT
- Enter data into a list: [2.32 ENTER 2.43 ENTER 2.39 ENTER, etc.] Continue until all data have been entered. (use arrows keys to go to the y value, if any)
- EXIT until you reach the main ("blank") screen. (If you try to calculate while you're in the data menu, it thinks you're still trying to enter data!)
- Press STAT
- Select CALC
- Select OneVa
- Select LIST, NAMES, xStat(F2), Press ENTER
- The calculator provides Max, Min, Mean, Standard Deviation, Sum, Sigma, etc. You will be primarily interested in the Mean and Standard Deviation (sx).

Posted on Oct 06, 2008

Ad

If you mean the standard deviation, there are two shifted keys on the third row marked with a lower-case Greek sigma. sigma_xn is the population standard deviation and sigma_xn-1 is the sample standard deviation.

Nov 12, 2013 | Texas Instruments TI-30XA Calculator

This is to be expected. A standard deviation of 0 means that all the data points are identical. Asking for the point below which .025 of the data lie is meaningless.

May 25, 2012 | Texas Instruments TI-89 Calculator

Yes. The sample standard deviation is 2nd [sigma x n-1] and the population standard deviation is 2nd [sigma x n].

Apr 02, 2010 | Texas Instruments TI-30XA Calculator

Hello,

Here is a screen capture from the guide. Hope it helps.

Here is a screen capture from the guide. Hope it helps.

Oct 03, 2009 | Texas Instruments TI-30XA Calculator

Jill. She scored two standard deviations above the mean, while he only scored one-and-a-half standard deviations above the mean.

Sep 11, 2009 | Texas Instruments TI-86 Calculator

Press 2ND [CSR] to clear the stat data.

For each data point, enter the number followed by SIGMA+

If you have grouped data, enter the number followed by 2ND [FRQ] followed by the frequency then SIGMA+

Press 2ND [sigma x n] for the population standard deviation or 2ND [sigma x n-1] for the sample standard deviation.

For each data point, enter the number followed by SIGMA+

If you have grouped data, enter the number followed by 2ND [FRQ] followed by the frequency then SIGMA+

Press 2ND [sigma x n] for the population standard deviation or 2ND [sigma x n-1] for the sample standard deviation.

May 25, 2009 | Texas Instruments TI-30X-IISTK Scientific...

You can get instructions from;

http://www.geocities.com/calculatorhelp/ti30xa.htm

It's straight forward to follow.

http://www.geocities.com/calculatorhelp/ti30xa.htm

It's straight forward to follow.

Apr 18, 2009 | Texas Instruments TI-30XA Calculator

Instruction booklet has key strokes and example at pages 10-11

http://education.ti.com/educationportal/downloadcenter/SoftwareList.do?website=US&tabId=2&paneId=18#27

http://education.ti.com/educationportal/downloadcenter/SoftwareList.do?website=US&tabId=2&paneId=18#27

Mar 04, 2008 | Texas Instruments TI-30XA Calculator

StdDev( {1,2,3,4,5,6,7,8,9,10} )

with your list inside the curly braces.

with your list inside the curly braces.

Nov 10, 2007 | Texas Instruments TI-30 XIIS Calculator

1. Put the data into a list.

2. OneVar list will produce a screenful (and more) of one-variable statistics.

OneVar is available through the STAT CALC menu. "list" in step 2 is the name of the list created in step 1.

2. OneVar list will produce a screenful (and more) of one-variable statistics.

OneVar is available through the STAT CALC menu. "list" in step 2 is the name of the list created in step 1.

Oct 25, 2007 | Texas Instruments TI-86 Calculator

985 people viewed this question

Usually answered in minutes!

Yes, what are the steps please to calculating SD on the TI-86?

×