What is meant by white list and black list? - Cell Phones

The white one may just form an earth loop,, I recently had a ceramic plate needing cleaned so we did the whole lot, I think most hobs have 4 wires and they are numbered rather than colour coded..hope this helps

Test each wire.
Black to red 240Volt
Black to White 120Volt
Red to white 120Volt
The white might be ground

Copy following links:
http://waterheatertimer.org/See-inside-main-breaker-box.html
http://waterheatertimer.org/images/Inside-Main-Breaker-Box-12.jpg

Gene
h

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Missing information alert. What is meant by "to TV black and white"? Are you saying you can't get playback on a black and white (and therefore old, analog) TV set? What connection set up are you using between recorder and the playback TV? At first glance it would appear you might need a digital to analog converter to process the DVR output prior to feeding it as a SD (standard definition) signal into your TV set for mmonitoring. thanks for clarifiying your question, including a description of your setup.

Are you having some issues with your printer? Can you give me more details about any issues you're experiencing on your printer?
If you meant to say that your printer is not printing "color" or "black and white", make sure your firmware is updated. Please visit the Lexmark website to download and install the Lexmark Pro900 Series Firmware Update.
The update helps fix print quality issues and will give you a highly reliable print system. If this does not help, please contact Lexmark Technical Support Center for additional assistance.

The RCA cable you are using is meant for standard resolution TV's. There should be a spot on the HD TV for the standard RCA cable. This will resolve the black and white color issue but unfortunately you will not get the benefits of your HD TV. Your best be is to get a composite cable for the Wii. You can get the cable from target or wall-mart but online shopping will typically result in a cheaper price.

I hope the info listed above has helped in some way.
If possible please rate this solution.

You will have power coming in through a black wire and white wire on the cable set that does not go out to your fan. The black will connect to your switch to power it. Then there will be two other terminals on your switch one for your fan and one for your light. The red and black that go out to your fan and light are connected to these two terminals. The whites get connected together. If you mix the red and black up and the switches are controlling the the wrong things, simply switch the black and red wires. (Note: If by three wires to your fan you meant black, white and bare copper this dual switch cannot be used, as bare copper is simply a ground wire and cannot be used as a constant electrical conductor.)

It will be your printer settings, although different, yours should be similar:-

Start - Printers and faxes - RMB default printer and select properties - Advanced - Defaults - Main - Check the Grey Scale box.

You may want to upgrade the print quality aswell if printing a photo.

Hello uze7, Here is the wiring match up for a 2009 Subaru Forester using the Metra 70-7552 wiring harness: NOTE: The actual harness will be listed as a Nissan harness, but has been used by Subaru since 2007. Also, I'm assuming that your Sony deck uses the standard color code. If not, you should have a manual that lists the function along with the colors. Match the wiring by function, not by color (although the colors may be the same). 2009 Subaru Forester Radio Wiring Color Code: Battery BLUE/RED (+) RADIO HARNESS Accessory YELLOW/RED (+) RADIO HARNESS Ground BLACK (-) RADIO HARNESS Illumination VIOLET (+) RADIO HARNESS Dimmer BLACK/WHITE (-) RADIO HARNESS Power Antenna YELLOW/BLACK (+) RADIO HARNESS LF Speaker (+) BROWN LF Speaker (-) BROWN/WHITE RF Speaker (+) BLUE/WHITE RF Speaker (-) BLUE/YELLOW LR Speaker (+) WHITE/BLACK LR Speaker (-) RED/YELLOW RR Speaker (+) GRAY RR Speaker (-) GRAY/RED Metra Harness: Yellow ? 12V Constant Red ? 12V Accessory Black - Ground Orange ? Dash Light Dimmer/Illumination Green ? Left Rear Speaker (+) Green/Black - Left Rear Speaker (-) White ? Left Front Speaker (+) White/Black ? Left Front Speaker (-) Purple ? Right Rear Speaker (+) Purple/Black - Right Rear Speaker (-) Gray ? Right Front Speaker (+) Gray/Black - Right Front Speaker (-) Standard CEA Color Code: Blue - Power Antenna Blue/White - Remote Turn-on Pink/Black - Audio Interrupt In (Phone) Orange - Illumination Red - Ignition (Switched 12V) Yellow - Battery (Constant 12V) Black - Ground Gray - Right Front Speaker (+) Gray/Black - Right Front Speaker (-) White - Left Front Speaker (+) White/Black -Left Front Speaker (-) Violet - Right Rear Speaker (+) Violet/Black - Right Rear Speaker (-) Green - Left Rear Speaker (+) Green/Black - Left Rear Speaker (-) Hope this helps.

the RJ45 wallplate is not meant for ethernet. It's an 8P8C connector for a phone. Will it work as a network jack? Maybe. I wouldn't use it, but if you really want to try, wire it thusly:

1 Blue --- Orange/White
2 Orange --- Orange
3 Black --- Green/White
4 Red --- Blue
5 Green --- Blue/White
6 Yellow --- Green
7 Brown --- Brown/White
8 White --- Brown

I'd still recommend a CAT5 wallplate with a CAT5 jack.

The white list black list gives me the impression that this is something on your network that is not allowing it to work. My school has a white list black list system for websites. Have you tried installing the qx5 on an freestanding computer to see if that works ok?