What does it mean on 1122 jazzy when the two red lights blink

Question edited for clarity.
Question moved form Car Audio to Pride Jazzy Select 6.

9 Flashes The park brakes have a bad connection. Check the left and right motor connections and wiring. Check to make sure that the power chair is not in freewheel mode.

jazzy select - Any electromechanical device requires ...

Videos as well

https://www.google.com/search?q=jazzy+select+6+blinks+9+times&

..

Walmart offers free shipping.

Unsure where locally is.

https://www.walmart.com/ip/Pride-Mobility-Jazzy-1122-12V-75Ah-Wheelchair-Battery-This-is-an-AJC-Brand-174-Replacement/133265346


Pride Mobility Jazzy 1122 12V 75Ah Wheelchair Battery This is an AJC Brand...

Hi possible joystick fault RING 1-800-800-8586..cheers

The weight capacity for 1122 is 300 lbs. Make sure tires are properly inflated and that batteries are fully charged..

Your version has a Dynamic Controls model controller and joystick.
Unplug the charger and engage the motor/brake lever so the chair is no longer in free-wheel mode (con't push by hand)
Turn the chair off, wait 5 seconds, turn the chair back.
If chair still does not run and your wrench is flashing you have a problem. Count the wrench flashes - the flash count indicates the error detected. 3, 4, 5, and 6 flashes indicate and error with the motors.
3=Left motor fault
4=Right motor fault
5=Left brake fault (may not be engaged)
6=Right brake fault (may not be engaged)
Any other fault code usually means the electronics or wiring is bad and not worth fixing.

put a peice of black tape over the light

Low batteries Outlaw. If you have charged the batteries and after only a little while you get the blinking red light -----Time for New batteries. Hope this helps you

The number of lights that are blinking indicate what the problem is. Visit this site to locate the type on controller on your power chair and you will be able to see that the blinking lights mean:
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Try to reset your manual brake release as this is a common problem.
If you continue to have a problem, contact your manufacturer or dealer for service. If your insurance purchased they power chair for you, they may also cover the cost of repairs.
Good luck!

hello 2 blinks on this tv means you have this issue below
PT-44LCX65
2 blinks 5 secs you have your lamp cover open

check for this

hope this helps

Change out the motor brushing on the motor that is not working, or get a nail filer & rub it against the metal pins the back of the chair for a better connection