Question about TCL L32D20
Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience.
Search the site by type in this key phrase " how to test a remote control " in its search box at the top right of the display window to get the related post quickly.
Posted on Jul 30, 2015
If you don't have a code you can do these steps to get your universal remote working with pretty much any tv:
1.) Turn your TV on. Then on your remote press the set button, it's the small gray button above the green button that says TV.
2.) Press the TV button. There should be a red light to the right of the SET button. This means that your remote is ready for the TV code.
3.) To find the TV code, press the + or - on your remote. This is located above the orange buttons. Once the volume on your TV goes up or down, stop pressing the + or - button.
4.) Then press the SET button again to set that code for your TV.
If the above steps do not work, keep trying. It will work! ;)
Posted on Jan 30, 2008
SOURCE: The remote for my TCL
First of all you hve to find where is the fault in the remote or in the tv. Checking the remote is very easy. If you have cammera in your mobile phone then switch on the cammera and point the remote to the cammera then press any key. If the remote is working then you can see a white light blinking. IR rays can be vissible through digital cameras. If there is no Light then you have to check the Oscillator cristal inside your remote. If avilabe try to replace the same with a new one with the same specification. You can check the remote with an AM radio also (see the video for that)
If there is white light then you have to check the IR receiver inside your tv. It will be fitted on the frond pannel of your tv. Try to replase the same if there is white light in the remote. Have added the picture of Oscillator cristal (Yellow ) and IR receiver (black) bellow. Also added a video which will help you to repair the remote.
Posted on Jul 30, 2011
If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops
Posted on Sep 14, 2014
Tips for a great answer:
Jul 14, 2018 | Televison & Video
Mar 27, 2018 | Element Televison & Video
Aug 31, 2017 | Westinghouse Televison & Video
May 15, 2017 | RCA Televison & Video
Jul 01, 2016 | Televison & Video
Jan 19, 2016 | RCA Televison & Video
Aug 05, 2015 | GE Televison & Video
May 27, 2016 | TCL L32D20
168 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: