My daughter has had cicciobello doll for 2 weeks. The mouth button will not come out after removing the dummy.

Sometimes that happens because there is something stuck in the baby's mouth you can't see, best idea is to unclog it with the tutorial here: https://www.youtube.com/watch?v=0wlJQvFz8X4 or go to a doll repair shop.

is this a doll that eats and (poops?)..the mouth is an upper hole and the lower hole should be a spot under the main body..if food particles are inside the dolls' body may need a tool like the old water pic flossing macine to clean it out..it is possible to redo a small garden sprayers tip/nozzle to accomodate cleanout of this doll..catch is to find some sort of presurized hose tip to put in the mouth cavity to clean out the body of residue..if that is what is happening..

Fixing it? I don't believe so. But you can go online Mattel and find out if there was a recall due to a flaw or defect in the production of it you may be able to get her a new one. If all else fails and your daughter really really really wants that one Barbie!!!( been there done that) A local electrician or handyman might be able to help you out.

slide tux collar down and find 4 staples in neck, with small flat screwdriver work stales from neck, they are quite long and it takes some time. then with thumb under mouth at chin, gently wiggle and pull owtwards until mouth slides from head, mouth must be removed before head will lift from neck. once head removed, you will see drive motor near top that drives mouth. there should be a smoll nylon string connected to small plastic wheel on end of this motor, most times the adheasive that hold this string in place has let loose and string is still in tact. before reconnecting press activation button and be sure motor is spinning, if so simply reconnect string to plastic end, and reassemble head I used 2 part epoxy (JB Quick) Note if motor is not turning when activated then this too needs repaired

DW Mylin.

We had the same problem a few months ago. We even bought another dummy, but it did not help. Then we found the solution by ourselves. My daughter took her baby born to her bath and we put her into the water. Then I pressed ******* the face for water to go inside through the eyes many times. After I did it a few times with a lot of water the doll start to close and open her eyes again with her dummy. I do not know for what reason but eyes start to stick inside. I believe it may be because of the food, or dust. Maybe not. However from my observations it happen when we did not bathe her for a long time.
I hope it helps.

String Behind Mouth On All 2002 Gem-my Dolls Breaks

same just happened to my daughters furby boom. (Only bought yesterday). Something happened when using the app around the the change voice option in the game. Tried changing batteries and presing the re-set button to no effect?

He can eat anything its not like the leaf has a magnet or anything if you put something in his mouth like your hand even, there is a little button/switch whatever on the roof of his mouth that causes him to eat

Very often the Dummy phones these days are made to be just that A DUMMY PHONE. Quite often I read that parts off dummys will not work on a real phone. In the day Dummies were just the real phones gutted and they glued a keypad and fake screen under the bezels. Now it is cheaper just have to have them pour plastic in a mold and make dummies. I wish you luck, but I would keep this in mind.