At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
i try everthing u can imagine and still cant go to factory settings . works fine with satellite but when i change to normal aerial dosnt give me the option to search for new channels the only thing didnt try was with a 4 numbers pin because i didnt find the correct one yet i will keep on trying lets see if i got any luck thanks for ur reply.i try everthing u can imagine and still cant go to factory settings . works fine with satellite but when i change to normal aerial dosnt give me the option to search for new channels the only thing didnt try was with a 4 numbers pin because i didnt find the correct one yet i will keep on trying lets see if i got any luck thanks for ur reply.
You can't post conmments that contain an email address.
need a factory reset as i cant get any channels and dosnt let me search for new ones so if i reset it to factory i will be able to set up as a new tv. please anyone?need a factory reset as i cant get any channels and dosnt let me search for new ones so if i reset it to factory i will be able to set up as a new tv. please anyone?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is only 2 possible ways, "remembering the password" or "saving important data to a SD card or computer and having to factory reset it".
Incase you want to factory reset it the steps are below. Hope this helps.
step 1 : power down phone & remove SD card "in some cases the SD cards memory has been erased, so remove it to be safe"
step 2 : press and hold the volume up, home button, and the power button at the same time for 5 seconds then release the power key only.
step 3 : wait for the recovery mode to boot up, and then use the volume buttons to navigate to "wipe data & factory reset"
(Incase of SD card use) step 4 : when your device is has booted up it will start up as if you just got the phone. When your done setting up your device, insert the SD and allow it to load into the device. (With some smart phones it might be safer to power down the device and then insert the SD card, allowing it to boot up with the phone)
The steps are: Step1:Download and install Windows Password Reset from http://www.windowspasswordreset.net Step2:Burn Windows Password Reset ISO file to CD/DVD,or USB. Step3:Put in your newly created CD and remove your Windows Password . So easy,right?
From the printer control panel, press Setup button > Defaults, press OK > Set Defaults, press OK > Use Factory, press OK. You will then be asked to select/enter your preferred printer settings just like the first you set it.
Source: How to Reset the X5600 and X6600 Series Printers to Factory Defaults
You can reset the whole thing.
Use the small recessed reset button usually next to the power connection, hold it down with a pen tip or paper clip fro about ten seconds.. Reset all settings to factory, including passwords.
Power off and on then use your browser to http://192.168.0.1
User = admin Password = password
If you have like an xbox or laptop wireless you'll have to re-configure them too, to connect again.
There was a small reset switch on your router, press the reset button for 5 second to reset the setting into default factory settings. Like in your case it is possible that the router need to reset for the first time.
thanks but it dosnt got any factory reset optipn
i try everthing u can imagine and still cant go to factory settings . works fine with satellite but when i change to normal aerial dosnt give me the option to search for new channels the only thing didnt try was with a 4 numbers pin because i didnt find the correct one yet i will keep on trying lets see if i got any luck thanks for ur reply.
×