RCI 2970n2. How do I connect a Turner Plus 3 mike?

Hi, I use this website elektrotanya.com to get free schematics,
They also have the Ranger RCI 2995 schematics available.
Hope this helps

Hi Carl, I found 2 different hook-ups so I will list them both. You can check them out according to the wire colors you have in the mic cord. First one and this may be for a turner mobile mic. ;
Turner
1- Shield & Red
2- N/C
3- Blue
4- White
5- Black
Yellow NC

This one is out of the Turner book but they did not list your radio exactly. This is the most popular hook-up for Realistic's.
Code E;
1-S
2- N/C
3- Bk
4- Wh
5- Red
Hope this helps, Mike

http://www.cbtricks.com/mic_manuals/turner/turner_mic_wiring_book.pdf

TURNER 4-WIRE MIC. WIRING
1. Ground Shield
2. Audio White
3. Transmit Black
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C

pin 1 ground
pin 2 audio
pin 3 TX
pin 4 not used on other mics or has 8v on TX for powered mics
pin 5 not used on other mics
pin 6 not used on other mics

https://www.theradioshop.net/

www.cbtricks.com

they make an adaptor, check ebay. i just got one for my d104 4pin to rci 6 pin. 5bucks free shipping.

AMC:
Mode to AM
Set generator for 30mV RMS, 1KHz sinewave.
With Mic gain at maximum VR14 Adjust for 100% modulation. Use modulation meter or oscilloscope with RF sampler.

can email you some.

here is the info you asked for the following is the correct wiring.


Mic Wiring Info
Stock Mic Wiring
1. Ground Shield
2. Audio Yellow
3. Transmit Red
4. Receive Black
5. CH. Up White
6. CH. Down Blue
Turner 4-Wire MIC. Wiring
1. Ground Shield
2. Audio White
3. Transmit Black
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C

Turner 6-Wire MIC. Wiring
1. Ground Shield & Red
2. Audio White
3. Transmit Blue
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C

Astatic 4-Wire MIC. Wiring
1. Ground Shield
2. Audio White
3. Transmit Red
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C

Astatic 6-Wire MIC. Wiring
1. Ground Shield & Blue
2. Audio White
3. Transmit Red
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C