When I insert the SD card I get a blank picture, I have been using 512mb for 3years, what do I do?

SD cards can fail. # years on a SD card may be all you'll get. Try another card to see if you can record pictures on it. If so, then the card has gone bad. If not , then the camera needs a repair shop.

Copy all your valid information from the SD card to your C: drive, and burn the files to CD-recordable.

Then, insert the SD card into the phone, and allow it to "format" or "initialize" the SD card for use with your Samsung device.

Dear,

First of all you need to confirm that what kind of memory card your are using. The officially recommended type and brands are here

Toshiba *SD Memory Card - Capacities: 512MB to 2GB *SDHC Memory Card - Capacities: 4GB to 32GB


Panasonic *SD Memory Card - Capacities: 512MB to 2GB *SDHC Memory Card - Capacities: 4GB to 32GB

SanDisk *SD Memory Card - Capacities: 512MB to 2GB *SDHC Memory Card - Capacities: 4GB to 32GB

rather than these might be problematic or not compatible...
Check this first

Best of luck!

Your Mercury Cyberpix S-210S has an internal memory of 16MB and can be expanded using an SD/MMC Card up to 512MB.Since the picture you capture using this 2 Megapixel camera has an approximate resolution of 1600*1200 and a size of approximately 400kB you can store only around 18 to 20 photos in an 8MB Memory Card.So if you want to store more pictures you have to insert a Memory Card of bigger capacity.Remember the maximum Memory Card capacity supported on your camera is 512MB.Thanks for choosing Fixya.

You should try putting the SD card into a PC Card Reader and see if there is any data on the card. That normally happens when there is a bad connection or the card is blank.

Hi - First off, did you try formatting the card through the camera's menu system? Did you have a smaller SD card that you used before that worked? According to the manual, which may be out of date, the camera uses up to 512 MB SD cards.

It could be that the manual was released before the larger SD cards were available or it could be a real limitation of the camera. It's hard to know, as there is little real useful information about this camera or company.

You could email their support at [email protected] and inquire about the camera's SD card limitations or call them at Technical Support: (847) 966-9590.

Good Luck,

Mikeywaf

That's odd.
Is it pre-owned? if so, they could have deleted the cheats and used it to hold pictures in their camera. I would suggest
getting a new one or go to www.coadjunkies.com and download cheats there with the sd card inserted into the computer.

I experienced the same problem with a 1Gb card. The Vivicam 4000 only supports SD cards no larger than 512Mb. My solution to the problem was to simply repartition the SD card into two equal 512Mb partitions using Cute Partition Manager...http://www.cutepm.com. You should be able to do much the same thing except you will have to create 4-partitions, each no larger than 512Mb. When doing so, use the FAT 16 format option. As a word of caution, after repartitioning, do not use the fomat option on your camera, or it will restore it to a single partition 2Gb format. Also, when using whichever partitioning software you choose, be sure that you have selected your SD card, and not your C-Drive. Hope this is as successful for you as it was for me.

Your camera uses a SD flash memory card. You have a xD flash memory card. Basically, you have the wrong size card. Hope this helps!