Queen marathon 20 years old does not pump the

Hope these help
https://www.speedqueen.com/support.aspx

https://www.youtube.com/watch?v=miydioyULxU

https://www.youtube.com/watch?v=LMgRO4GAgBg

If you wish to get some details; check the site linked here. Pull up older posts. ..
http://electro-medical.blogspot.com/

The washer tub shaft bearing is defective, a very involved expensive repair.

:) Hey... The absolute best machine on the market are the ones from SPEED QUEEN. THey wash clothes dependably, are direct dirve, and spin out the water better than any other on the market. THe speed queen machines pump and spin at the same time. THe other brands (including newer maytag-made by whirlpool) don't do this anymore, for they pump the water out, let the clotes go to the bottom of the tub, then attempt to spin causing them to wobble shake and shimmy as they get off balance. Speed Queen, on the other hand spins and pumps at the same time. THis means the clothes are spun out to the sides of the tub from the to to the bottom. MOre water is spun out so less drying time is required. Water is cheap but gas and electricity is expensive. So, if you are going to save one.. i suggest the shorter drying time to be the winner! THe old maytag machines that lasted people 30+ years before they quit had this technology.... Speed Queen still has it! THe warranty on speed queen machines includes 3 years without buying extended warranty.. all others make you purchace this.. SOme of them don't even come with a year! SHAME On you! Find a speed queen dealer and at least go look .. :)

Maybe look on the belt, to see if there is a same number on it. take it to a appliance repair dealer get him or her to check for you

I seems the mixing valve is not allowing hot and cold to be mixed.

Pi,r,squared times height. Remember math back when we didn't have computers? So that's 3.14 x radius(half the distance across drum)squared(times itself) times height or depth of drum. Remember to do radius times itself first, then Pi, then height.

Hi, just fixed the daughters speed queen, same problem. The three brake shoes were worn allowing the tub to spin with the agitator.
replaced the shoes, washer fine. At first I thought it was the top ring. spent 30 dollars for nothing.
good luck

Your LW8203W is at least 12 years old. It is leaking from the tub seal, Your machine needs to be rebuilt or replaced.

If you have it rebuilt I would also put in a new belt, pump, brake pads, upper tub bearing and the tub seal it needs.

Call and authorized Speed Queen or Amana dealership and ask for a price quote over the phone. Then price out a new machine.

Your choice.