- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To reset password of your CCTV DVR press and hold the ENTER button for 15 to 30 second until the DVR restart's. After the restart you DVR default wizard will come up the same way like if you are setting up the DVR for the first time.
https://www.youtube.com/watch?v=dmspTHBS7e8
Remove LAN cable if it is attached
Restart you DVR
Choose the "admin" account in USERNAME
Use MASTER PASSWORD in PASSWORD. Now you can access your DVR
Go for Main Menu >Advance > Account
Select "admin" user
Click on Modify Password, In Old Password Use Master Code,
In New & Confirm Password type your new password (without any special characters).
Now you can login with your NEW PASSWORD that you have created.
Admin and Passwords come as default. If you changed it and forgot, try unplugging the DVR and restarting. You can also still open the settings and try to re- factory the DVR if the settings permit. Next, I have to assume that you got the Booklet or the email or URL addresses to download same.
There is in the hand book the default password as the User name:password and the Password #'s 1-6. Good luck.
Default User and Password on Everfocus is usually
Admin
Admin
Nevertheless, you should contact your local distributor, and after providing the product serial number, they can generate a reset user and password, that shall be used only once, and then, you must enter a new user/password combo.
Installer Master Code 1397
Selecting this accesses the Main menu. If the menu is locked, you may need to unlock first.
To unlock the menu:
Select the area the password will be typed and a digital number pad will appear.
Type in the password. The default password is 123456.
Once you have typed in the password, press the enter button to close the digital number pad.
Click "APPLY," if the password is correct the main menu will open.
Unlock Menu Prompt
Password Setup
This menu selection allows you to change the device ID, enable password protection as well as set a new password for
users and admin on your DVR. When you enable password protection, you will be prompted to insert a password each
time you wish to access the main menu. The DVR will automatically log the user of admin out after 60 seconds.
To Change the Device ID:
1. Select the box next to "device ID" and a keyboard will appear.
2. Type the name you would like then select enter to close the keyboard.
3. Select "apply" to save your changes.
To Enable Password Protection:
1. Select the scroll bar next to "password enable" and list will appear.
2. Highlight and select "On" to turn the password enable on.
3. Select "apply" to save your changes.
To Change the Password
You have the option to change the password for user and admin. A user will only be able to access the search menu to
view saved footage, whereas an admin will be able to access anything in the menu. Both default passwords are set to
123456.
1. Make sure password enable is set to "ON".
2. Select the ****** box next to the password you would like to change and a keyboard will appear.
3. Type the password you would like then select enter to close the keyboard.
4. Press "Menu" and highlight "Next" to confirm.
5. Type in the same password again, next to "confirm" in order to confirm the password then select enter to close the
keyboard.
6. Once you have entered the desired password, select "apply" to save your changes close the keyboard.
HOPE THIS HELPS!~
must try this login account: admin password: 130901
It didn't work
×