Re: Messaging is inactive on all lines after push...
Feature 981 give you 'inactive feature'. This means there is no communication to the voice mail. Sometimes a quick fix to this would be unplugging the power from the voice mail unit and plugging it back in after a few minutes. If it works the voicemail may take 5-10 min. to come back.
Re: Messaging is inactive on all lines after push...
Hi. Inactive feature often means that there's a problem with your connection to the call pilot. Do you have lights on your call pilot? Did you assign a mailbox to the extension you're working on? Did you remember to connect the call pilot to a station port?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This means the system can no longer communicate with the voice mail. You can try to locate the voice mail and power cycle the unit to resolve the issue, If you still get inactive feature after the reboot you will need to replace the vms.
That means that the voicemail system is no longer recognized by the phone system. Check the lights on the voicemail to see if its still receiving power.If so try unplugging and plugging the voicemail to reboot it. The voicemail can take up to 6 minutes to totally reboot.
First make sure u r using Voicemail system which is either Star talk or call pilot. If u r any one of this then only u can use F 981, 982 , 983 or 985. Its a feature code of voice mail. If u r using either of this and still gettin inactive feature, then try with rebooting The Satr talk or call pilot i.e. switch off from mains wait for few mins and switch it back on. After rebooting it will take 15-20 mins to boot up the system and after that u can use these feature.
A. Turn on phone with full battery and non-T-Mobile SIM in place. Allow phone to completely boot up to Wrong SIM screen.
B. Enter from Wrong SIM Screen
*#7465625# to confirm lock status
C. Scroll through Interrogate Screen
1. Network lock - Active (this is the one you'll be deactivating) 2. Subset lock - inactive 3. SP lock - inactive 4. CP lock - inactive 5. SIM Card lock - inactive 6. Activa lock - inactive 7. Auto network lock - inactive 8. Auto subset lock - inactive 9. Auto SP lock - inactive 10. Auto CP lock - inactive 11. Auto SIM Card lock - inactive 12. Phone lock - inactive
D. Push "C" button under navigation button to clear Interrogate screen back to Wrong SIM screen
E. From the Wrong SIM screen enter the following:
*7465625*638*00000000*00000000# Those are two series of eight zeros. The phone will not show the zeros but will show dashes in their place.
Phone may make a small tone and at the bottom of the screen it will read "Network Personalized" or perhaps "Network Already Personalized"
F. Now input the following from whatever screen shows up:
#7465625*638*00000000# (again this is a series of eightzeros)
Phone may make small tone and will read "Network Lock Deactivated"
G. Turn off phone H. Re-start the handset and allow it to reboot. J. Enter from Standby Screen
*#7465625# to confirm lock removal status
K. Scroll through Interrogate Screen
1. Network lock - inactive (note that this lock is now inactive) 2. Subset lock - inactive 3. SP lock - inactive 4. CP lock - inactive 5. SIM Card lock - inactive 6. Activa lock - inactive 7. Auto network lock - inactive 8. Auto subset lock - inactive 9. Auto SP lock - inactive 10. Auto CP lock - inactive 11. Auto SIM Card lock - inactive 12. Phone lock - inactive
That's it. Your phone is ready to accept SIM cards from just about any GSM mobile telephone service provider in the world.
If you received a "wrong password" message you will need to insert a working SIM and reset the password to the default 8 zeroes "00000000". After that you may try this process again and it should work.
By doing the reset (1st temp) you will lose all your data ie contacts, messages, photos, videos etc etc so back them up on your pc first.
Take out your sim card and follow the instructions below :
1st temp. put this number in the keypad *2767*3855# let it reboot(restart) now its ready for permanent.
Put in a sim card of a network that the phone won't except and follow the instructions below. ( If you can't type anything with a locked sim card inserted just take it out and do the next step without a sim card in the phone)
Don't worry if your screen shows - - - - - - - when typing it is supposed to do this.
AND THEN *#7465625# to check the locks....all locks are inactive...these are all the locks... network lock - inactive subset lock - inactive sp lock - inactive cp lock - inactive sim lock - inactive activa lock - inactive phone lock - inactive auto network - inactive auto subset lock - inactive auto sp lock - inactive auto cp lock - inactive auto sim lock - inactive
This procedure does not change your imei number at all
This generally happens from one of two things. Your voice mail system is connected to your phone system through a station port. If it loses connection it will not communicate with the phone system. Loose wire or connection can cause this. or it has just crashed and will need repair or replacement.
First thing you want to do is unplug the unit wait 15 minutes and plug it back in. wait 10 minutes Try feature 981 from a set that has voicemail. if nothing. hit feature 985 from a m7310 set or a m7324 set not a m7208. If it comes back with inactive fearture now your connection between the units is bad or the unit itself is bad. If it comes back with the voicemail intercom # and you cant get into any mailboxes it has lost all programming.Try this first.