Installation of a downloaded driver for Lexmark X1290 All-In_One

If you have the Windows installation CD that cane with the Acer then boot the laptop with this Windows installation CD and reinstall Windows. Use the Windows Product Code label on the bottom of your laptop to install Windows..
You will also need to download the device drivers for your model laptop from the Acer WEB support site, make sure the download the correct XP or Vista version of the drivers which matches the Windows version you are installing.

Try downloading the drivers from here
http://driverscollection.com/?H=X1290&By=Lexmark
They have drivers for Vista / XP, etc. This should help
Thanks
Ranjit

http://support.acer-euro.com/drivers/downloads_gd.html
here u can get all drivers by providing your model numer...

if you format go this
web

http://www.partition-recovery.com/download.htm

i need all the drivers for acer aspire

Hi,

You need to download the Vista compatible setup here from Lexmark,

http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:567:0:0&searchLang=en&os_group=Windows%20Vista&target=

Run the setup after it finishes downloading but ONLY connect the printer to the computer when the setup instructs you to do so.

I bought a Lexmark X1290 printer and installed a wrong driver (for WinXP) from the enclosed CD. Then I could not run the All in One program. After many reinstallation attemps, I finally found a solution (which is unfortunately quite hidden at the Lexmark website):

1) Unplug the printer's USB cable from the computer.
2) Download the cleaning utility from ftp://ftp.lexmark.com/driver/inkjet_drivers/Cleanup/.
3) Double-click on the cleanup utility and follow the on-screen instructions to run it.
4) Restart the computer.
5) Download all files from ftp://ftp.lexmark.com/driver/inkjet_drivers/Cleanup/reg/
6) Follow the instructions in the "Vista BackDoor Instructions.txt" and delete all remaining Lexmark
keys in the registry.
7) Restart the computer
8) Download a proper driver for Windows Vista from the Lexmark website.
9) Install the driver accordingly to the instructions (it's important to plug the printer's USB cable when you are ask to, not before)

The problem with Lexmark Unistall and CleanUp Utility is that you cannot delete all Lexmark registry keys while you arelogged in the system. This is anellegant way how to circumvent the problem.

het apparaat wil niet printen.ik heb een test gedaan met de printer [uitgelijnd] perfect af gedrukt. test pagina

Your talking about the printer drivers I suspect can you load this up from the control panel under printers remember to turn your printer on so Vista can see it and then from the control panel under printers you should be able to load the new driver.

If you are able, when the pc is booting up keep pressing F8, this will take you to safe mode and not allow the graphics driver to run. When in the safe mode options, select either Last known good configuration or start windows in safe mode. Last known good configuration should find the last good system settings, when it reboots. Start windows in safe mode allows you to go into windows using the administartor account, and then you should select system restore and restore back to the day before or just before you updated the graphics driver.