Question about Vehicle Parts & Accessories

1 Answer

Battery was disconnected/now is reconnected. car won't start remotely nor with key. help

Posted by Anonymous on

Ad

1 Answer

Philip Jordan

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 18 Answers

Hi, most cars have a procedure when you fit a new battery, the 1990s Mercedes needed to be locked and unlocked 3 or 4 times before they would start, Range Rover are the same + switch ignition on and off without trying to start it, so you just need the procedure for your vehicle ,
hope this helps,

Posted on Mar 04, 2019

Ad

5 Related Answers

Anonymous

SOURCE: HOnda Accord EX 1998 ALARM

Have you tried putting your Valet (original keys) into the ignition and turning it to the II position?

Posted on Aug 25, 2008

Ad

Anonymous

  • 95 Answers

SOURCE: Car alarm won't reset after disconnecting car battery

you should try to hit the unlock button on the remotes and that should disarm it. Try disarming that, that way and if that doesnt work we will go from there

Posted on Feb 22, 2009

Anonymous

  • 2 Answers

SOURCE: remote not working after disconnecting battery

If car Convenience Control Module(module that control key remote) lose power- remote adaptation to the car will be lost. This apply to some Audi models.
What you can try to do is:
1. Disarm alarm manually by opening door lock with the key
2. Put key into ignition and turn to on position (don't start the car)
3. Press few times remote button (with the ignition in on position)
Depends on your year model it my work (works on the newer models), if not you have to go to the dealership to program your keys.
Good luck!
Grzesiek

Posted on May 22, 2009

Charlie

  • 280 Answers

SOURCE: 88 cadillac deville, ac blower fan wont shut off,

Ralph,
Most common cause of this is the blower fan (proper name for the fan you refer to) continuing to run is a shorted out Electronic Climate Control Module. This solid state device replaces the older style fan speed resistor block (at about 4 times the price) This unit is found on the top of the HVAC box under the hood. (HVAC means heating, ventilation and air conditioning) The HVAC box is found on the passenger side of the firewall. Look behind the A/C's accumulator. It will have an electrical wiring plug on top of it. It will be fastened to the HVAC box with a few 7mm hex head screws. Very easy to change.
FYI, do yourself a favor and replace the blower fan motor at the same time. The Electronic Climate Control Module usually fails because the motor is drawing to many amps of current. This is because it's bushings are worn out or the brushes are worn out.
This is very common on Cadillacs and Buicks.
Charlie
PS Not sure why car won't start. Either you drained the battery or blew a fuse which controls starting the engine. Need more info regarding the "no start" condition.

Posted on Jun 14, 2009

Anonymous

  • 2 Answers

SOURCE: 2003 Ford Taurus won't start after reconnecting the car battery.

you need to lock the doors wait 60 sec then at drivers door turn key to left 30sec then to right

Posted on Jun 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed fob battery but immobillisor won`t switch off. I usually press the unlock button on key fob with key in ignition


Car electronics can be very tricky sometimes. Changing the battery in your remote should not cause any need to reprogram your key or remote. I have a trick for you to try:

The old car battery reset trick
I know this sounds absurd, but it works sometimes and is worth trying. If you exhausted all of the options above, disconnect bot terminals on your car battery for 10 minutes. Then reconnect them and try your key fob. This has worked for many people and I have no idea why. If you do, please comment below to explain.

Hopefully this helps out, you would be surprised how many electrical issues this little trick will fix on any vehicle.

If it doesn't work I would suggest what others have suggested in this forum, which is reprogram the key and remote. You can find key and remote programming instructions here:
https://www.keylessentryremotefob.com/Key-Fob-Programming-Instructions-s/1856.htm

Feb 15, 2017 | Cars & Trucks

1 Answer

Key won t unlock doors


If you have a remote you could use jumper cables to put power at the starter from under the car.

Feb 22, 2014 | Cars & Trucks

1 Answer

Battery key fob


Turn the ignition key on , open the hood, disconnect the battery for two minutes, reconnect and try .

Dec 14, 2013 | Prestige Remote Start

1 Answer

Put new battery in car remote and it won't work


try disconnect car battery and then reconnect again and try your key remote.

Feb 16, 2013 | 2010 Dodge Charger

1 Answer

1997 jeep grand cherokee won't start after alarm went off


I just had the same prblem. Reconnect your alarm first of all. You need to use your key bob "remote" to deactivate the alarm before starting. It is a feature "good one" i might add that should someone try to steal it the jeep will not start until u deactivate it w theke bob.

Jan 20, 2013 | 1997 Jeep Grand Cherokee

1 Answer

2002 galant won't start ... disconnect and reconnect battery and it does start!


could be cracked battery lead bad conedtion to earth or chip could be loose

Aug 01, 2012 | 2002 Mitsubishi Galant ES

1 Answer

Hi, have a toyota avalon, tried starting the car , it won't start, but then the starter engaged and won't turn off evenwithout the key, disconnected the battery and it stopped , when the batte


It sounds like you have a bad actuator. This is attached to the starter and has a solonoid that pushes the starter motor gears into the engine gear. If the solonoid is faulty this may happen. Also check alignment of the same.

Mar 18, 2012 | 1999 Toyota Avalon

1 Answer

1995 geo tracker won't start. I've replaced everything except the ignition switch. It used to click when i turn the key, now it won't even click.


DISCONNECT YOUR BATTERY AND RECONNECT, THIS SHOULD RESET THE BRAIN.

ALSO...WHEN YOU TURN THE KEY, LISTEN TO HEAR IF YOU CAN HEAR THE FUEL PUMP COME ON...IF NOT, GUESS WHAT? HOPEFULLY NOT!... BUT,YOU MAY NEED TO REPLACE THE FUEL PUMP, IF YOU CAN'T HEAR IT WHEN YOU TURN THE KEY, AFTER YOU'VE RESET THE BATTERY!

HOPE THIS HELPS!

Aug 30, 2011 | Geo Tracker Cars & Trucks

1 Answer

My remote key and regular key would not open up my car. AAA can and opened it but security system won;t let me start car or put it in gear help


Pull the security relay, leave battery disconnected for about 20 mins. Insert relay and reconnect batter and try remote.

Dec 27, 2009 | 1995 Jaguar XJ6

2 Answers

Peugeot 406 immobiliser keypad will not accept code


hi, on your keypad, when key turned on, do have the red and green light on.
if so its locked out, will not start even with correct code.
need to know that first
and diesel or petrol.
i know your car is before a 1999 what year is it

May 17, 2009 | 2000 Ford Escort

Not finding what you are looking for?
Vehicle Parts & Accessories Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vehicle Parts & Accessories Experts

Thomas Perkins
Thomas Perkins

Level 3 Expert

14842 Answers

Brad Brown

Level 3 Expert

18397 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Are you a Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...