Need a base mount for 44" polaroid tv - Polaroid Televison & Video

Photocraphic Shop , or E- Bay

Good luck with finding one. Each TV manufacturer has a unique mounting system for the stand. Unless you go directly to Polaroid, you will have a very hard time finding one. Might check Ebay also.

I think this aftermarket stand will work. The reviews mention a couple of people using this with heavier lcd/plasma screens with no problems. Hope this helps!

http://www.amazon.com/Universal-Stand-Base-Wall-Mount/dp/B00DZVPFGU/ref=sr_1_5?ie=UTF8&qid=1399529274&sr=8-5&keywords=50+inch+universal+tv+stand

offcource you may converted if you have desktop base .

Kindly check the operation manual, if not locate one for free download in websites.

PART NUMBER: 151-700GF371XAH. Just place LCD on mount and insert mount bolts through rear of stand. takes less than 4 min. Will need hex key. brand new the stand runs about $116 from Sears parts store.

The TDA-03211c weighs 39.5 pounds; however, I'm not sure if that is with or without the base. The shipping weight of the TV is 50.3 pounds. Most wall mounts use the standard screen diagonal measurement to determine what size TV it will support. So the 32" is sufficient information for choosing a wall mount.

I hope this helps.

Cindy Wells

Good day!!!

all you need to do is to get Philip screw driver and remove all screw that connected to the base of your TV after that you can freely remove that base...


Thanks for using fixya...

My ex-husband threw away the pedestal stand for the Polaroid Polaroid FXM-3211C TV DVD Combo which I now have. I need a pedestal stand....do you know where I can find one?

I found out via Polaroid's customer service... you need size M6 screws to reattach the base to the TV