Question about Pride Health & Beauty
Either go to a pride dealer and get the proper job switch or look on eBay or Maplin for a similar. Check current rating of switch. Make sure you disconnect the batteries before attempting this job.
Posted on Jun 17, 2015
SOURCE: wiring for pride rally scooter.
Sorry but your probably going to have to get this to a service technician. That is a big problem you have there. Most wiring is`nt even color co-ordinated so it`s not a matter of matching up colors. I`d call a professional,
Posted on Apr 03, 2009
most keys for that type of scooter are the same, (not like a house or car key) call Pride 1-800-800-8586 for replacement or any Pride dealer can help you. Also, a paper clip can jump the ignition by placing it in their to get you around temp.
Posted on Apr 20, 2009
The buzzer is a piezo-electric device that is the "horn" for the scooter. It also will alert when the scooter is in reverse, if this option is programmed into the scooter. It receives its power from the PC board or console board which is located inside the top of the shroud at the tiller, where the thumb paddles that direct the scooter are located. If liquids have reached the board, or if condensation has affected the board, the circuit that controls the buzzer may have shorted causing it to come on constantly.
Opening the top of the shroud is fairly simple. Remove about 6 screws holding the clamshell cover together, remove the speed adjust knob, and it should come apart. Inside you'll see a PC (printed circuit) board, green in color with lots of small electronic parts embedded on it. The buzzer is also inside, usually about the size of a marshmallow and black in color with tiny holes to let the noise escape. There will be two wires leading from the buzzer to the plug-in at the PC board. Unplug the buzzer and the noise will stop, but you won't have use of the "horn" at all. Replacing the PC board can be done by a certified Pride tech, but it will probably cost you about $150.00 for parts and labor.
Hope this helps.
Posted on Jul 07, 2009
Hi. The serial number will be on a sticker on the upright support that holds up the seat. You will have to lift of the seat, and take the cover off the batteries to see it. It should be on the front of the deat support. Neil.
Posted on May 27, 2010
Tips for a great answer:
Apr 28, 2016 | Pride Sundancer 3 Wheel Electric Scooter
Feb 08, 2016 | Pride Health & Beauty
Mar 28, 2015 | Pride Health & Beauty
Oct 08, 2014 | Pride Health & Beauty
Jan 07, 2013 | Pride Mobility Products Pride Legend XL -...
May 05, 2011 | Pride Mobility Products Pride Mobility...
Oct 13, 2010 | Pride Mobility Products Health & Beauty
Apr 20, 2009 | Pride Go-Go Ultra X 3-Wheel Travel Scooter
116 people viewed this question
Usually answered in minutes!