Tecumseh model#OHH60-7193d. Need a carburator

You may already know that Tecumseh ceased business about 2008. It seems Barrett Small Engine has some of the literature on Tecumseh engines & parts. Try this link: http://www.barrettsmallengine.com/tecumseh/parts.html

Hope this helps,
[email protected]

I use parts diagrams try jackssmallengines.com

Here is the link to the service manual:
http://nerecfarm.com/docs/t/tecumseh-bvs-143-service-manual.pdf

good luck... but your number says craftsman all over it. have about go to sears and type in that model number... your Tecumseh number would be like an LV160 or something similar

You need to be more specific,model of motor etc.

on the opposite side of the carburator it has 2 ears on it just turn it on the side wit apan under it the older models have a drain plug underneath use a 3/8 extension on it turn countr colckwise .

I believe the carburetor part number for your model is 632631. I have the same TroyBilt chipper/Vac. It has a Tecumseh H50-65582W engine. A good parts diagram can be found at
http://www.outdoordistributors.com/pdf/Tecumseh/TECUMSEH-MODEL-H50-65582W-PARTS-LIST.pdf
If this is the right part, you can buy it at Jacks Small Engine parts for $79
Good Luck!

You may have better luck in identifying the engine type and manufacture (Briggs & Stratton, Tecumseh, etc) and get the number of the engine vs the machine itself, if possible. If you are able to do this, you can search ebay or the net for a wider range of possibilities for a purchase.

that could be wiring issue that the batter isn't able to take up the electricity supplied to it.. u know, the conductor between them..
if possible get a manual from reliable-store to fix it urself

The float needle in the carb isn't shutting off the fuel and it's pouring out the vent. This is a common problem. You should tear the carb down and replace the needle and seat. You should check the float to make sure it doesn't have fuel in it (if you shake it and hear fluid inside it, it's shot and you'll need a new one.) Parts for Tecumseh engines are readily available from most decent lawn mower shops. Be sure to take you model numbers from the engine to the dealer to get the right parts.