Question about Ultra LCD30-500 Television
Honest to god... throw it away, it is JUNK. i have the same tv, and have spent more fixing it than it is worth!
Posted on Nov 27, 2007
Posted by chalmo1
tv wont work just flashes the start screen for a second but i still have sound tryed to unplug it thats all i tryed
i have the same problem, i know that there is a kit you can buy to fix this problem but i have to look for that info. but in the meantime this is what i do to fix the problem, i hold the power button down on the remote until the blue power light on the tv comes on. then wait and see if the picture comes on. if you get sound and no picture then press and hold the power button on the remote until the power goes off and then back on again, so the blue light should turn red then back to blue again. immediately release the button or you will turn the tv off again. wait and see if the picture comes on. if no picture and sound again then repeat the process. it can take anywhere from 2 tries to 50 or more! sorry but this is the best i have found so far. also, if you notice the dish network emblem come on then leave it and the picture will come back. good luck.
Posted on Dec 27, 2007
What one has to do until replacement is available....
unplug the adapter cord from the adapter box ( you need not to unplug the tv set), take a hair blow dryer run on high into the opening in adapter box for 60 seconds, then reconnect the adapter cord into adapter box, turn on tv, WELLA!!!!
I also learn that if you leave the tv set off for at least 24-48 hours
and then follow the above instructions your tv set will work for a couple of days without problems...
Posted on May 18, 2008
I have the same make and model lcd t.v. and it too went black. It however is not the adapter. All you have to do is take off the back cover, after you remove the speakers and stand. Then once you get that removed you will see a shinny metal cover on the left side. You have to remove the three silver tiny screws, and remove that cover. you will the inverter(it looks like a mother boared). Remove all the wire connections carefully, and don't forget the black one at the bottom. Once you have done that there are 3 more silver screws on the left of the inverter. Remove them also. Then the inverter can be removed. Take a knife and scrape the contacts where each wire plugs in. There are 2 in each one exept for the 2 on the right. Just gently scrape them, and look for any bent ones and if any are found straighten them. Then carefully put it back together and it will work like new. If the red light is on the bottom of the screen it means there is power to it. to your amasement it will work!!! If any questions please feel free to email me @ [email protected]
Posted on Feb 26, 2009
The power supply\power adapter may be listed @
Rots ov ruck [lots of luck!!]
Posted on Apr 20, 2008
The common solution to this problem is replacing the inverter. Here is the link to the site that I've bought my new inverter from. It is easy to install. all you need is a philips head to get the cover off.
Posted on Feb 13, 2008
If you want to sell the power adapter (ad-13d-2) OR the whole unit please contact me as I have the same unit and my power adapter is FRIED. the power adapters have been on backorder from PWW for last 3 months. thanx jack [email protected]
Posted on Dec 13, 2007
if you have the power supply and all you need is the cord, it looks like the cord is the same as a cord for a computer power supply.
if that not right , reply will look somemore have a good day please remember to rate bama46, thanks
Posted on Aug 23, 2009
Tips for a great answer:
Jul 27, 2011 | Jet 3 Ultra Power Chair
Jan 20, 2011 | Bunn Black Flat Lid Ultra 2 Ultra Gourmet...
Sep 24, 2010 | Samsung Q1 Ultra Tablet PC
Mar 22, 2010 | 2002 Harley Davidson FLHTCUI Electra Glide...
Nov 18, 2009 | Nokia 6630 Cellular Phone
Jun 04, 2008 | KitchenAid KSM90 Ultra Power Series Stand...
Jul 08, 2011 | Ultra LCD30-500 Television
2,601 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: