Reset lamp time

1 Answer

ka4iup

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.
Hitachi Master
4,062 Answers

The lamp time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the lamp. Pressing the RESET button on the remote control or the ? button of the projector displays a dialog. To reset the lamp time, select the RESET using the ? button. RESET ? CANCEL • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

Posted on May 13, 2015

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

How to reset mitsubishi VLT-XD221LP projector lamp reset Kumar Salem

Reset of the lamp operation time
1,Connect with the Power cord, and turn the power on.
2,with a signal supplied to the projector.
3,Menu--INSTALLATION--LAMP TIME RESET-and press
ENTER button to reset lamp operation time.
any questions, feel free to contact me
We supply original projector lamp,bulb,accessories,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price.
have a nice day!
Jerry,Lampdeng Limited

Read full answer

Oct 07, 2013 • Mitsubishi VLT-XD221LP Replacement Lamp...

0helpful

3answers

Replaced XD300U projector lamp. Need to know how to reset lamp timer. Won,t turn on because lamp timer has expired to 0. Needs to be reset. Lost our manual. Please help.

Hello,

"Reset the lamp counter
i. Press and hold Exit on the projector
for 3 seconds to display the total used
lamp time.
ii. Press Menu on the projector or on
the remote control to access the lamp
hour timer. An adjustment message
will appear.
iii. Press or to reset lamp hours
and press EXIT to leave."

Read full answer

Apr 21, 2008 • Televison & Video

3helpful

1answer

I just change the lamp but still the lamp hours shows the old timing

HelloYou have to reset the lamp time after lamp replacement. To reset lamp time follow these steps.[1] Press the power button, so that a picture is projected onto the screen.[2] Press the 'menu' button to display the 'main menu' screen, and press 'up' or 'down' buttons to move the cursor to select 'options-2'.[3] Press the 'enter' button to display the 'options-2' screen, and then use the 'up' and 'down' button to select 'lamp runtime'.[4] Press and hold 'enter' button for approximately 3 seconds. The 'lamp runtime' will change to 'time reset [power off]. Note: If the 'menu' button is pressed the lamp time resetting screen will be cancelled.[5] Hold down the 'power' buttonfor at least [0.5] seconds or press the 'power' button twice to turn oFF the power. This will reset the cumulative usage time for the lamp unit into Zero. OK.

Read full answer

Dec 20, 2011 • Panasonic PT LC75E Multimedia Projector

0helpful

1answer

I need to reset lamp timer

Here is the procedure for reseting the lamp.
It can be found at:
http://fixyourdlp.com/blog/wp-content/uploads/2007/09/panasonic-tyla1000-lamp-instructions.pdf

Be sure the power cord is plugged
into a properly grounded wall outlet.
Then, press the POWER button on the
projection display or the remote control
to turn the unit on.
Warning:
Perform lamp time reset only when the lamp has
been replaced.
When lamp time reset is finished, the LAMP indicator goes out.p re placement,z
While pressing the VOL- button on
the projection display, hold down the
PIP or SPLIT button on the remote
control at same time for more than
5 seconds.
LSQC0334 C
LAMP TIME WAS
RESET TO 0.
END

Read full answer

Apr 29, 2009 • Panasonic PT-43LC14 43" Rear Projection...

2helpful

1answer

After replacing the lamp in an XD480U projector, what are the 2 buttons needed when pushing the power button, to reset the Interval of lamp replacement time? The buttons to choose from are: Auto position...

To reset the lamp operation time on a Mitsbishi XD480U:

Plug in the power cord, turn on the lamp, and press the Left Arrow button, Right Arrow button, and POWER buttons on the control panel ALL AT THE SAME TIME, holding them all down for about three seconds.

Notes:
•Unless these three buttons are pressed at the same time, the lamp operation time isn't reset.
• Make sure that the STATUS indicator is lit twice and the lamp operation time is reset successfully.
• The projector doesn't turn on if the lamp cover isn't attached securely.
• Be sure to reset the lamp operation time whenever you replace the lamp.
• Do not reset the lamp operation time unless you replace the lamp.

Read full answer

Dec 17, 2008 • Mitsubishi XD480U Multimedia Projector

0helpful

1answer

What 2 buttons other than the Power button

Read full answer

Dec 17, 2008 • Mitsubishi XD480U Multimedia Projector

1helpful

1answer

Indicator lights on, no function, no fan, no lamp

Press the MENU button to display the "MAIN MENU", and then select "OPTION".
Press the ENTER button to display the "OPTION" menu, and then select "LAMP RUNTIME".
Press and hold the ENTER button for approximately 3 seconds.
The "LAMP RUNTIME" will change to "TIME RESET [POWER OFF]".
Turn off the power and disconnect the power cord.
This will reset the cumulative usage time for the lamp unit to "0".

Read full answer

Oct 11, 2008 • Panasonic PT-LB20U Multimedia Projector

5helpful

1answer

How to check for lamp life of my mitsubishi multimedia Projector xd 450u (DLP)

This should work:

How to reset the operation time meter
Plug in the power cord, switch on the projector, and
reset lamp time by pressing the (left and right arrow) and POWER buttons on the control panel simultaneously.
Important:
• If the 3 buttons was not pressed at the same time,
the lamp time may not be reset.
• Please confirm the TEMP indicator illuminates
about 2 seconds and the lamp time has been
reset.
• The projector will not turn on if you do not secure
the lamp lid.
• You must reset the operation time meter after you
replace the lamp.
• Do not reset the operation time meter unless the
lamp has been replaced.

Read full answer

Jul 14, 2008 • Office Equipment & Supplies

0helpful

1answer

Directions for lamp time reset

Lamp Time Reset Procedure:
Be sure to reset the Lamp time to "0" after replacing the new
Lamp.
1. Plug in the AC Cord, and turn on the power by pressing the
POWER button.
2. Press and hold the VOLUME DOWN button on the unit and
the SPLIT key on the remote together for over 5 seconds
in power on condition.
When the reset is finished, the display will indicate that the lamp hrs have been reset to 0 and the LAMP LED goes out.

Read full answer

Jun 17, 2008 • Panasonic PT-61LCX65 61" Rear Projection...

0helpful

1answer