I lost my word processing icon during a power outage. How do I get it back?

The remote might not work if the memory was lost during the outage. However the switch on the wall should work because it is hard wired to the motor. Reprogramming may be in order.

Does the unit have a breaker on the back? There may also be a fuse. You should be able to find a users guide on the CyberPower website.

If the unit may have failed during the power outage.

Possible that during the power outage there was fault in the mains supply and with the oven being plugged on it is possible that the power supply or the main board is damaged.
Unless you are able the top cover it is difficult to confirm if this can be silly fault like a fuse blown which is on the mains circuit or a Step down transformer or the processor board.

Aube timers have back up battery that recharges after power resumes.
Battery should hold programming during outage.
If battery does not charge, then screen doesn't light up and programming not possible.

Aube makes several timers.
Aube timers and manuals posted at following link.
http://waterheatertimer.org/Aube-timers.html

If you have different timer, add a comment

Yep, thats the way power outages work. They usually destroy your electronics which is why you have to unplug just about everything. The tv needs repair.

make a new voice recording to the answering service followed by beep to record message.

Hi,

As in most current devices, absence of power (as in shortages/outages) simulates a reset. The reset reverts the unit back to factory defaults which of course does not have user configurations and settings.

A workaround perhaps would be with the use of a UPS as those used in computer systems.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

What is happening here is you are transferring load to battery during a power outage but on return of Line Power the UPS is not smoothly transferring back to Normal mode. As a result you are basically turning off your computer. Two options... shut down your computer orderly during an outage or buy a new UPS.

DD
Dynamic Power Solutions LLC