I need the code for my akai TV on my Ge universal remote cl3

GE remote control have no set-up code for Akai. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the relative post easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Using the Code Search Feature
Step 1 Look for the version number of your GE Universal Remote Control, as described in the Manually Entering Codes section.
Step 2 Turn on the device you wish to program into the GE Universal Remote Control.
Step 3 Hold down the "Setup" button for approximately four seconds and then press the device button.
Step 4 Press the "Power" button and watch for the device to turn off. If you're using a Version 2, 3 or 4 remote for a DVD player or VCR, press the "Play" button and look for the device to start playing.
Step 5 Wait two seconds and press the "Power" button again, if the device does not turn off. Repeat until the device turns off. If you are using a Version 2, 3 or 4 remote, it automatically sends the Power or Play command every two seconds, so you don't have to press the button again.
Step 6 Press the "Enter" or "OK" button on a Version 1 remote to lock in the code. Press the "#1" button within two seconds to lock in a code on a Version 2, 3 or 4 remote. The indicator light goes out when you've successfully entered the code