What makes the washiing light flash and not start?

-Good for you.


Good luck
Mai

Hello. I really need the make/model number to help you accurately. However, from the symptoms you're describing, it sounds like the drain pump is jammed. A lot of dishwashers turn on the drain pump first to remove any stagnant water sitting in the bottom of the pump. Then, fresh water is let into the tub, fills to the proper amount, then the main pump starts. The lights flashing are an error code--different combinations of buttons flashing mean different things. On some models, a button light will flash a certain number of times, pause, then flash another number of times. This is a binary code telling the user what is malfunctioning. That's why I need the model number and any other info to help diagnose the issue. Thanks!

what light flashes???

try to adjust the settings of your printer, by the way are you using a replacement ink? if so,, then this is because you are using a low quality ink maybe.

maybe your wishy washy fluid container is empty?...did u check to see if there is any in it?

Put clothes in, select water level,& temp. select cycle you may have to pull out knob or push in now washy clothesy.

Do you have the ISO on auto ISO or do you have it set on a high number?

Check outlet pump.Clean and try again.Jan

Make sure that your monitor cable has not come loose off the PC

try replacing the tuner on the tv