Trail card lock on my screen will not come off. Changed to different cards. Its not the card. Any suggestions would be appreciated

Check your memory cards. If you are using SD cards, there is a small slide-lock on the side of card. Move the slide away from the LOCK icon, re-insert the card in the camera, being careful not to cause the slide to move again, and you should be able to use the card normally.

on the SD card on the left side of the card is a tiny switch,make sure it is pushed all the way up towards the contacts

SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

WILL NEED TO SEND IT IN FOR REPAIRS

SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

I have the exact same problem with my M80XD. I have a request in with Moultrie. I will post their answer.

Sound as some incompatibilitie card.

I just bought,last August, a Tasco Digital Trail Camera - 119223C . Took pictures until Jaunary 2011, my camera display shows Loc and the SD Card flashes. The instruction manual does not reference this setup code. Does anyone know what 'Loc' means? I tried to reformat card, I also so not get a Y/N option for formatting. I bought a new card and changed batteries. no change!

SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.

camera has a 2 year warrenty, this is a manufacturing problem, sent mine in and they are sending me a new unit to replace the old one.