How do i factory reset a macbookpro 2013model

Reinstall the operating system, using disk or backup partition!

When you start it, repeatedly press F10 and see if you get a recovery message then follow instructions.

startup and regular sound White screen appears but no apple logo appear ,
1) smc have been reset multiple times. possible motherboard video hardware issue cause over heating.
2) hold option key switch on laptop it will be see hard disk or DVD drive (apple disk inside) icon, the motherboard good if icon appeared. and the motherboard video dead if not appear. hope to help a little

The two "whirring" noises that you hear on power up is normal. The beauty of having a new macbook is you can reinstall the software very easily and a fresh install should fix your problem. Put the disk that came with the machine into the disk drive and turn the computer off. Turn it back on and press and HOLD the "alt" button until you are given the option of booting from your hard drive or your disk. Choose the disk and when it boots up, FIRST go to disk utility and verify the hard drive. If it comes back with no problems, proceed with the fresh install of the system by following the prompts on the disk.

No need to factory reset your PC. Go to system restore, restore the system to a point before you installed the dongle, then the problem will be solved.

try reseting the dv deck to factory settings then open quicktime in your macbook go to file the go down to new movie recording then on the errow that is pointing down select sony DSR-45

HI please get it at : www.driverskit.com/Camera/Sipix.html
Regards, Jay

You may need to do a clean install. It is possible the crash was caused by the wireless faulting out. If you have the time, create a recovery disk and locate your restore partition. This is normally D: drive. Do a format and restore the system to original factory settings using the restore disk you create and the restore partition. If you can't create these your only other option is to purchase a full version of Windows and do a clean install using that. Make sure you choose to format the hard Drive C: as it is possible that your drivers are stored on any other drives on your computer.

Can you be more specific ?
You want to erase the whole hard disk ?
or do you want to reset the computer to factory defaults?
Do you have an OS to install after deleting your hard disk?
As to the drivers you can download them from www.dell.com

http://www2.panasonic.com/consumer-electronics/support/Drivers-and-Downloads/list-Digital+Camcorders