My sony kdl 46 turn on tv green light for few sec then stnby light flashes 2 times , what does that mean

SOURCE: Tv cuts off and green light flashes

If your set was manufactured around July 2005, you may need a firmware upgrade to solve this issue. On the Sony website you can enter your model # and serial # to see if you TV is affected. If so, it is easy to have done and may be free from Sony. It sounds like the issue they described in the writeup on the required formware update. I had mine done within few months of when i bought it (purchased in Dec 2005) and it has been working flawlessly since.

Good luck!

Donnieboy999

SOURCE: Sony Bravia standby light flashing 6 times

there is a bad ground may on the cable check the voltage on the cable & set if on cable call the cable company. if tv call sony they may help with cost may be still under warranty

SOURCE: tv bravia kdl 40v3000 problem turning on

To wayne: The balancer board is in fact available by itself. You can get it at many different parts depots here on the web. I just suffered from a similar problem, on the same tv and it solved my problem perfectly (Stupid 13 blink, blink code...)

The searchable part number is SSB400WA20. Its referred to as a voltage inverter (for the backlight of the lcd panel.)
Good luck!!!

SOURCE: sony bravia kdl-52w3000, turn tv on, no picture or

Most likely this is caused by a defective main board. Changing the main board will fix the issue about 95% of the time.

To be absolutely sure, the voltages need to be checked on the power supply. If they are not the values listed in the service manual, then you should replace the power supply instead (accounts for the other 5% of the time).

SOURCE: sony bravia kdl 46s4100 no picture

it sounds like your back light might be going out. You might be able to fix this by installing a new backlight inverter board.