Go to www.youtube.com/how_to_setup_front_panel_connectors
you mite have to re range the wording to get the front panel light setup
you mite have to use motherboard type, various type of word and to the point but they will be able to help you resovle the issue
ps if the photo on the screen diplay is correct, the words mite be on the motherboard, it mite be abbrivated but just remember try the connector one way if it doesnt work than flip it 180 degrees, the board should also give you the side of positive [+] side, you put the color wire to the [+] side most of the time. the photo shows you the placement of connector and the connector are printed on the cable match the colors of the board to the connectors
SOURCE: mother board driver
http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=191
here u can download......
SOURCE: MotherBoard won't power on (Could be LED placement issue)
Hi there.
On the motherboard look for the front panel, it should be
marked PWR and coloured green, also the plug that connects to it should
be marked PWR_SW.
Have a look at these pictures for an idea >>>>>>
Good luck and thanks for using FixYa!!
SOURCE: MSI P45 Diamond motherboard not booting up
First check the power suply. If it is ok then check the processor.
SOURCE: Can't connect SATA Hard Drive to MSI PT8 Neo-V
You tell where in the System or in the BIOS. In BIOS on the SATA Mode or RAID Mode while in the System you install RAID Software to recognize and detect any SATA or RAID Hardware.
Good luck!
234 views
Usually answered in minutes!
×