How do i fix a button that is hard to press on my comcast remote

images for where on the remote is the OK button



More images for where on the remote is the OK button

RC: Tv code so i can use ok/select button on comcast remote

www.remotecentral.com > ... > Consumer > Original Equipment Remotes

Mar 3, 2010 - 13 posts - ‎7 authors
I have the comcast dark grey remote and a vizio lcd tv .when i press the tv button i then can press the menu button it brings up my tv menu and ...

Button Functions by Remote ' MyDISH ' DISH Customer ...

https://www.mydish.com/support/.../remotes/button-functions-by-remote
Register, Button, Button Sub-Category, Function, Condition ... on screen menu/pop-up, -. 2, Color Buttons, -, -, Function varies by screen and customer selection.

Select/OK button doesn't work when Using Comcast remote with ...

www.avsforum.com/...remote.../1533595-select-ok-button-doesn-t-work...

Comcast uses at least 11 different remote controls. I referred to the manuals listed on their remote control page for instructions on programming the three Comcast-branded remote units:

Comcast Universal Remote (Red OK/Select button)
Sylvania LCD TV codes: 20000, 20035, 20043, 20081, 20593, 21593, 21781
Procedure:

1. Turn on the TV.
   
2. Press the TV button once.
3. Press and hold the Setup button until the TV button blinks twice, then release Setup.
4. Enter a five-digit code from the list. If this is done correctly, the TV button will blink twice. If you enter an invalid code, the TV button will produce one long flash and the remote control will exit the program mode.
5. Aim the remote control at the TV and press the Power button. If you have the correct code, the TV will turn off. If not, repeat steps 2-6 with a different code.

If none of the codes work, you can try the code search procedure:

1. Turn on the TV.
2. Press and hold TV. Press and hold Setup until the TV button light blinks twice, then release Setup.
3. Press 9-9-1. The TV light will blink twice.
4. Press and release the digit 1. The TV key will blink twice. Press the Power key.
   
5. Aim the remote control at the TV. Press CH+ until the TV turns off. You may have to press numerous times until the remote control finds the right code in its library. Stop when the TV turns off.
   
6. When the TV turns off, press Setup once to lock in the code set. The TV light will blink twice.
   

Comcast Universal Remote (Grey OK/Select button)
Sylvania LCD TV codes: 0000, 0035, 0043, 0081, 1781
Procedure:

1. Turn on the TV.
   
2. Press the TV button once.
3. Press and hold the Setup button until the TV button blinks twice, then release Setup.
4. Enter a four-digit code from the list. If this is done correctly, the TV button will blink twice. If you enter an invalid code, the TV button will produce one long flash and the remote control will exit the program mode.
5. Aim the remote control at the TV and press the Power button. If you have the correct code, the TV will turn off. If not, repeat steps 2-6 with a different code.

If none of the codes work, you can try the code search procedure:

1. Turn on the TV.
2. Press and hold TV. Press and hold Setup until the TV button light blinks twice, then release Setup.
3. Press 9-9-1. The TV light will blink twice.
4. Aim the remote control at the TV. Slowly Press Power and TV alternately until the TV turns off. You may have to press numerous times until the remote control finds the right code in its library. Stop when the TV turns off.
   
5. When the TV turns off, press Setup once to lock in the code set. The TV light will blink twice.
   

Comcast Digital Transport Adapter (DTA)
Sylvania LCD TV codes:

here is a link to all comcast remote controls and there manuals. Code will be in the manual
http://www.comcast.com/corporate/customers/customer_support/remotes.html

try this

press tv button (lights up red)

hold setup button for 10 seconds (tv button blinks twice)

enter code 10030

Press power button on top right. If tv turns off your good

If it doesnt work follow steps above but try these other codes 11348, 11745, 11783

If none of the the codes work try following these steps:

1.manually turn on the t.v.
2.press and hold the setup button.
3. press and release the tv button the light will blink once and then stay on.
4.press the channel button repeatedly up to 300 times until the device changes channels. the light will blink and then stay lit.
5. press and release the mute button to store the code the light will go off

there are a couple of ways to go about it... you can either do a code search with the remote by pressing the tv button then hold down the setup button until the tv button blinks twice. Then press 991 the tv light will blink again then press 1 and then power. then you would press the channel up button until the tv turns off. Then press set up and that will lock in the code. If you pass the code and the tv will not power back on through the remote repeat the same process but press the oppisite channel direction. The other option is search google for your tv code.

10768

1. Turn on your device (i.e. TV).
2. PRESS the button for the device you want to program (TV, VCR, CABLE, AUD, etc.) then RELEASE.
3. PRESS and HOLD the SETUP button until the red LED for the selected device flashes twice, then RELEASE.
4. ENTER the 5 digit code for your brand from the list above.
5. You should receive 2 quick flashes on the LED for the selected device after entering your code.
6. PRESS the POWER button to test the code. (On VCR,LD,and CD players use PLAY)

Scooter, you may first try to use the ff codes:

31254

10178

or

11017

Here is a list of codes from Comcast:

http://www.comcast.com/MediaLibrary/1/2/CM/VanityURL/documents/codes.pdf

here is the manual for your Comcast remote:
http://www.comcast.com/MediaLibrary/1/1/Customers/Customer_Support/Digital_Cable_with_OD/Digital_Cable/remotes/Remote_M1067BX3.pdf

Hope this helps.

The answer depends whether its a Comcast DVR Remote or a regular one. The DVR codes are 4 digit -- the others are 5 digit. I got 0060 to work for my DVR remote.

comcast sucks and its tech support are a bunch of idiots. the book that comes with the remote is wrong (and for some reason no one in tech support knows this). the remote requires 5 digit codes and all the codes in the book are 4. typing the number 1 in front of any of the codes in the book, for any device and manufacturer, should fix this problem.