Washing Machine
Fault Cod Fault
FH No Water Inlet
FA Aquastop Failure
FP Drain Failure
F5 NTC Failure
F6 Tachometer Failure (no motor movement detected)
F7 Triac Short Circuit detection
F8 Heating Element, Open Circuit
F9 Overflow Failure
F10 Motor control unit (Thermal)
F11 Communication failure
F12 Heating Element Short Circuit
F13 Dispenser Circuit Error
F14 EEPROM Failure
F15 Motor Control Unit Error
F16 Control Failure (Control Unit)
F18 Control Failure (Control Unit)
F20 Control Failure (Control Unit)
F21 Control Failure (User Board)
F22 Control Failure (User Board)
FDL Door Lock Error
FDU Door Unlock Error
Whirlpool Washing Machine Fault Codes
So the answer is Overflow Failure
SOURCE: whirlpool front loader
please clarify the "some times throughs the switch" part...does the timing switch continue to run even though the machine stopped?
SOURCE: What does a F09 error mean?
Since Sears doesn't manufacture its own equipment I need a product code number to access the specific features of your appliance. Email me with that info and I can find what the error codes are.
SOURCE: Whirlpool Duet Front loader
"F02" is a Long Drain error and "F09" is an Overflow Condition. The following two links explain both errors:
http://www.fixya.com/support/r615268-f02_error_code_whirlpool_duet_kenmore
http://www.fixya.com/support/r805532-f09_error_whirlpool_duet_kenmore_elite
The common factor with both links is the drain pump. There's a good possibility that you have something lodged in the pump. The next link explains how to check the pump for obstructions:
http://www.fixya.com/support/r385845-checking_drain_pump_in_whirlpool_duet
Follow the links and check the items common to both, as this could be the source of the two error codes occurring. It does not take much to damage the drain pumps in these washers. If you do find something in the pump, clean it thoroughly, and it still does not work, you will have to replace it. Let me know if it comes to this point and I can give you advice on how to order a replacement and how to replace it. I hope this helps you.
SOURCE: Whirlpool Front Loader Washer Model# WFW9600
I had a suds error and then a F 35 error. Turns out I had a collection of junk and debris between the door seal and the drain at bottom of door. Cleared out the debris now my washer is running like a top. (washer senses pressure error, thats why I got said error codes)
390 views
Usually answered in minutes!
×