Question about Jura Capresso Impressa E75 Espresso & Coffee Maker
I'm in the same loop , i have an ENA5 jura..
Try using warm water in the watertank, important that the water is not too hot, it can cause leakage in the o-rings in the fluidsytem.
Repeat the procedure a few times, if nothing helps, turn off the machine and wait 1 hour and try again.
If you can`t get around this message, then the flowmeter needs to be changed.
Posted on Jul 12, 2009
Using hot water with descaler works even beter then just hot water. I had to repeat the filling process many times with hot water with descaler before the flowsensor started working again
Posted on Apr 10, 2019
We have the Impressa F60 and ran into the same problem. I finally called Jura support. The tech told me to remove the grounds tray, and to take a dry paper towel and reach way back inside and wipe out the grounds. On my model there is a plastic flap that you have to go past and wipe the top of the chamber. Anyway, I was HIGHLY skeptical that this would work, but it did! Now, every time I empty the grounds I wipe this out. If we forget, the open tap issue eventually comes back.
Posted on Jun 05, 2010
Tips for a great answer:
Apr 19, 2014 | Jura Capresso F8 Espresso Machine
Jan 01, 2014 | Jura ENA5 Automatic Coffee Center with...
May 08, 2012 | Jura Capresso Jura / Capresso IMPRESSA J5...
May 06, 2012 | Jura Capresso Jura Ena 5 2Cup Coffee Maker
May 02, 2012 | Jura Capresso Jura Ena 5 2Cup Coffee Maker
Feb 10, 2012 | Jura Capresso Jura / Capresso IMPRESSA J5...
Feb 01, 2012 | Jura Capresso Jura-Capresso J6
Jan 29, 2012 | Jura Capresso Impressa S9 Coffee...
May 19, 2010 | Jura Capresso Impressa E9 Espresso Machine...
Dec 28, 2009 | Jura Capresso Impressa F7 Espresso Machine
Feb 15, 2018 | Jura Capresso Impressa E75 Espresso &...
2,367 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 1 Expert
Level 3 Expert
Step 2: Please assign your manual to a product: