Question about Oregon Scientific Measuring Tools & Sensors

Open Question

Bluetooth not working on main unit to connect with mobile device.

Unit is receiving info from remote sensors but when trying to pair with mobile device, indicator is not showing.

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: JVC KD-AVX33 pairing problem

same problem here

Posted on Oct 02, 2008


Anonymous

  • 3 Answers

SOURCE: my blackberry bold does not recieve data via bluetooth

I think you read wrong praky, capt said already paired. The correct solution would be as follows:

1. Open the Media app.
2. Select a media type (e.g. Music)
3. Press Menu.
4. Select Receive Using Bluetooth.
5. Select Yes. (It will then ask you the location you want to save to but of course by default it will select the proper folder)
6. Select Save. (Transfer will begin

Posted on Mar 08, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: S-Sir Sub Unit won't pair

I almost went out and bought a Sony HDMI cable but I tried something first and it worked me. I wrapped tightly the transceiver on the back of the main unit with aluminum foil and what do you know it fixed the problem. I guess since I was using a cheap HDMI cable the foil helped to shield out the interference. Sony HDMI cable $70.00 or aluminum foil 5 cents.  Let me know if this works for you as well.
Brent mevioradio.com

Posted on Apr 26, 2009

Anonymous

  • 630 Answers

SOURCE: how to connect my nokia BH-104 bluetooth handsfree to N73 mobile

Most handsfrees need you to hold the on button for about 10 seconds to trigger the pairing. Hold the button until the indicator flashes rapidly.

Posted on Oct 03, 2009

micromatikal

Tim Grayson

  • 2777 Answers

SOURCE: i have nokia e71 mobile

The passcode is just "0000" without the quotes of course.

Please make sure you rate my answer 4 thumbs up, it is extremely important to me. I would be forever grateful if you could do so. If you need more help on this question please just respond to my answer here and I will get right back to you.


Thanks
Tim

Posted on Oct 21, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why can't I receive input from the outside sending unit?


Make sure that all the batteries are good!!
This procedure outlines the typical process to pair the sensor and base.
Base Station Battery Installation

·Remove the printed vinyl label from the LCD screen of the base station
·Position the remote sensor near the base station
·Open the battery compartment at the back of the base station and insert (2) AA batteries according to the polarity markings. Replace the battery compartment cover.
·Within a short time the RF signal icon (located to the left of the outdoor temperature channel indicator) will start flashing. This indicates that the base station is ready to pick up the RF outdoor temperature signal from the remote sensor. It will continue to flash for 3 minutes or until the signal from the remote sensor is detected.

Register the Remote Sensor
·Open the battery compartment at the back of the remote sensor and slide the channel selector switch to your desired channel. For the first remote you may select any channel, for additional remotes select any unused channel
·Insert (2) AAA batteries according to the polarity markings. Be sure to install the batteries in the remote within the time that the RF signal icon is flashing on the base station. 1541 WeatherGuide Wireless Weather Forecaster with Barometer

Jan 07, 2016 | Measuring Tools & Sensors

Tip

How to get your ge ear piece to connect


How do I link my GE Bluetooth in ear style headset, model 86707 or 86710?

--------------------------------------------------------------------------------

Answer :
Turn on the mobile phone and place within 10 ft of the headset.
With the headset turned off, press and hold the Talk button for about 7 seconds. You will hear a "pair" tone and the LEDs will flash continually to indicate the headset has entered into pairing mode.
Release the Talk button. The headset is now is "pairing" mode.
Initiate the device discovery feature (Bluetooth discovery) on the mobile phone. Refer to your mobile phone manual for further instructions.
When prompted by the phone, enter the headset passkey (0000). When pairing is complete the LEDs on headset will flash at 3 second intervals and the headset will be placed in standby mode, ready to make and receive calls.
Note: On some mobile phones you will need to activate the Bluetooth feature first and then search for the Bluetooth device. Please contact your cell phone manufacturer or the User's Manual for further information on how to pair pair Bluetooth devices.
Click to view the instruction manual for:
86707

86710

on Feb 28, 2008 | GE Bluetooth In-ear Headset Wireless...

1 Answer

Having a problem pairing my iPhone 6 to my Tx-sr333 receiver. Iphone just grinds and can't find Bluetooth.


Hi Don,

Pairing is necessary when using the Bluetooth-enabled

device for the first time. Before starting the procedure, learn

how to enable the Bluetooth setting function and to connect

with other devices on the Bluetooth-enabled device.

1. Press BLUETOOTH on the remote controller.

The unit enters the pairing mode and the BLUETOOTH

indicator starts flashing.

2. While the BLUETOOTH indicator is flashing,

complete connection on the Bluetooth-enabled

device in the nearby area within about 2 minutes.

If the name of this unit is displayed on the Bluetoothenabled

device's display, select this unit. Paring will end

after a short time.

???? If a password is requested, enter "0000".

???? When connecting the unit to any other Bluetoothenabled

device, start pairing by pressing and holding

BLUETOOTH until the BLUETOOTH indicator starts

flashing. This unit can store the data of up to ten
paired devices, Thanks, JT

Mar 09, 2015 | Onkyo Audio Players & Recorders

1 Answer

Cannot control receiver from remote


Does the power button on either remote work? If nothing works, we'll try to see if your remotes are actually functioning.

Get some electronic device which can view a live image on a screen. A cell phone camera, digital camera, digital video camera, and (I think) even a web-cam will work. If you're using a digital (still) camera, you don't need to take a picture as long as you see a live image on the screen. Take your remotes and find the LED on the front end. There may be one or two. (If there's two, one actually isn't an LED, but that's not too important.) Point the front of the remote at the camera (LED's facing the camera), and press buttons. You should see the LED's light up in the live image. While these LED's normally produce light which the human eye can't see, digital image sensors can, and they change this invisible light to light we can see, on the screen. (Cool right?) So, if your remotes are working then you'll see the LED light up on the display. (To make sure your camera is actually working as I am suggesting here, find a remote which you know does work and try it.)

If the LED's are not lighting up, (and you've verified that your live digital video device can "see" these type of LED's), then your remotes are dead. Yes, it's unlikely that both your original and universal remotes are both dead - but it's possible. If the LED's are lighting up then you have one of two problems. One: the remote is not correctly paired with your system, and two: the IR receiver in your system is pooched. Let's look at the fixes for these.

Not correctly paired. Your universal remote has some sort of programming or learning function. Try programming it again, or programming it to a slightly different model of receiver and see if it works. If you've "learned" it from your original remote and it's not working, then maybe your original remote isn't paired correctly with your unit. If this is the case, contact either the place you bought it, or the manufacturer and tell them what's happened. You can't change how the original remote "talks" to your system.

The IR receiver in your system is pooched. Contact the place you purchased the unit, or the manufacturer, and have SA-HT930 system serviced. If you're handy with electronics you might get lucky and find something burnt out inside, but in my experience this will be %0.25 successful. If the rest of your system works perfectly, I wouldn't crack open the case - it's not worth your time.

Jul 04, 2014 | Panasonic sa-ht930 Home Theater Audio...

4 Answers

I can't get the receiver button to work on my remote control. I turned it off some how? VSX-1020k


Hello,
You could try this:
1. Press and hold the R.SETUP, press "4" for three seconds. The LED flashes continuously.
2. Press the number button "1"
Now press the receiver on button. Did it work?
If it doesn't try taking the batteries out of the remote and wait for at least 30 seconds then put them back in and try turning your receiver on again using the remote.
Chris

Aug 21, 2011 | Pioneer VSX1020K Receiver

1 Answer

Sk4000 remote will not pair with headset, tried everything and checked with support. They said be sure and pair remote before pairing phone. Tried that and still nothing. if the remote is no good there is...


If you have verified that the battery is good in the unit, try this (from the folks at Parrot). The HCU is the main control unit.
1) Turn the HCU on
2) Clear the memory on the HCU by holding down the power button and accept call button (the two large buttons on the face of the HCU)
3) Wait until you hear the HCU make the request "please pair device"
4) Hold the volume up and the volume down keys on the remote for 15 seconds
5) Release the buttons on the remote.
It might be fixed now. Press the switch on the bottom of the remote to switch to radio and see.

Jun 09, 2011 | Parrot SA Parrot SK4000 Motorcycle...

1 Answer

I dont have the code to my bh-602


According to the manual it is 0000
I added an excerpt of the manual here :
Pair the headset
1. Ensure that your mobile device is switched on.
2. To pair the headset if it has not been previously paired with a device, switch on the headset. The headset enters the pairing mode, and the indicator light flashes blue quickly.
To pair the headset if it has been previously paired with another device, ensure that the headset is switched off, and press and hold the power key until the indicator light starts to flash blue quickly.
3. Activate the Bluetooth feature on the mobile device, and set it to search for Bluetooth devices. See the user guide of your device for instructions.
4. Select the headset from the list of found devices.
5. Enter the passcode 0000 to pair and connect the headset to your device. In some mobile devices, you may need to make the connection separately after pairing. See the user guide of your device for details. You only need to pair the headset with your device once. If pairing is successful, the headset appears in the menu of the mobile device where you can view the currently paired Bluetooth devices.

Mar 21, 2011 | Nokia bluetooth headset bh-602

2 Answers

Bluetooth connection not working. Tried with a couple of phones to find the player with no success.


Hi,

Make sure that the mobile phone which you're trying to use is paired with the Car Audio System.
Check if the Blue-tooth icon at the front panel display is lit.
If the pairing is completed, try connecting the device to the head unit. Press and hold the BT button for 3 seconds to connect the mobile phone unit to the Car Audio system.
If the unit is not getting connected, then try to RESET the unit by pressing the Reset button located inside the front panel using a sharp pointed object. Once the unit is reset, try pairing the unit again and then connecting the devices.
You may also check the compatible Bluetooth devices with the Car Audio System.

Thanks for using FixYa.

Feb 15, 2011 | Sony MEXBT3800U Xplod Bluetooth for Car or...

1 Answer

I can't pair D665 with T-mobile G1


HI,

Hi, first you have to enable the Bluetooth to scanning mode,
To do this, press and hold the power button continously for 10 seconds, you may have a stable LED, this shows that its in discoverable mode, Now perform scanning and you may get your device and you can pair and make it work

Please rate this solution if this solves your issue, or leave me comment ill help further
RNJ VINODKUMAR

Dec 17, 2009 | Sony STR-D665 Receiver

6 Answers

Can't get Craftsman garage door opener to work with both remotes.


Just to make sure what is the make and model of the garage door opener? is it the wireless keypad on the outside of the garage your having the issue with? Once I have more information I can assist you further.
Thank you,
Lee

Nov 23, 2008 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Measuring Tools & Sensors Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oregon Scientific Measuring Tools & Sensors Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Brad Brown

Level 3 Expert

18438 Answers

Are you an Oregon Scientific Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...