At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When putting on belt and brush housing are u makeing sure the switch on the main housing is being engaged when putting on brush housing to main frame of Vacume
HERE is the belt installation instruction. On your vacuum it is a bit different how the brush roll is installed but I am sure you will be able to figure this out. Adjust screws on the both ends of the brush roll to have bristles sticking out by about 1/8 of the inch. HERE is also a video on belt installation but the one with pictures is more in depth.
Take the nozzle of, remove the brush roll, put the a new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on the front until it locks, when it grabs the belt it will be hard to turn. Re-install the nozzle on the machine and lock it down. Turn the knob again all of the way, this will release the belt unto the pulley.
Put the belt over the brush roll, set it in the middle, put the brush roll into the head and put on the bottom plate. Turn the big knob on the front of the nozzle to catch the belt, turn it until it locks into place. Then put the nozzole onto the front of the vac, then turn the knob all of the way the other direction, it will put it on the motor pulley.
Even if you have a new belt, do everything this guide tells you to do. The seller may have the power nozzle assembled improperly. If the brushroll is in wrong or the base plate is not on correctly, it may cause these symptoms.
×