The printout has a scratch in the same place on

• Most likely there is a scratch on drum of imaging unit
• or scratch or dust on transfer belt
• or dust on LSU

Check all these , should get resolved.

• try this:
• http://drivers.softpedia.com/get/PRINTER/Samsung/Samsung-CLP-510-Printer-Driver-300-for-Mac-OS.shtml
• Support for generic PCL laser printers has been added here:

Gutenprint and Gimp Print for Mac OS 10 2 through 10 8 and later

HI There,

Please folow the below link to download the latest installation software and the drivers for Samsung CLP-510 Laser Printer. ( You can even download the user manuals and installation manual from here )

Link :
http://www.samsung.com/in/function/search/espsearchResult.do?keywords=CLP-510+Laser+Printer&input_keyword=CLP-510+Laser+Printer

Enjoy Installing the printer software and drivers and happy printing !!!!

As long as your asking about the CLP-510 then the answer is no. It is a PC printer only with no copying capability. Samsung does make some multifunction color lasers that will Copy/Print/Fax and Scan.
Good Luck and Thank You for using Fixya.

Can be short of toner before the pagecount is at max for the capacity of cartridge.

If you look at the roller at the edge of the toner cartridge, it should have an even coating of fairly dense toner.

Remove each toner in turn, shake, and reinstall. This will often give you a few more pages.

Rated capacity is a guide based on a 5% page coverage.

Some remanufacturers are a little 'economical' with the toner they put in their catridges.

Well one thing you should do is when your printing something out before you print make sue that you have selected color not black and white because most printers have a default setting to use black and white. Also make sure that you have color ink available to print.

please shake well to your toners.then verify your toner. if any scratch is appear then please change the toner.

samsung clp 500 toner cartridge can not use samsung clp 510
bcase clp 500 is without chip and clp 510 chip base cartridge so never u can user.

Change the fuser unit if you have to hand. The problem is likely caused by a lack of pressure from the pressure roller. Also check the transfer roller for a similar ghost image.

may be the drum of your laser cartridge must be end of its life orwaste toner collection unit must be full.