Question about Howard Miller 613-528 Rosewood Bracket

Open Question

How do I change the battery on my Howard Miller 613-528 Rosewood Bracket clock?

Posted by Anonymous on

Ad

1 Related Answer

joeguest2

Joe2

  • 2080 Answers

SOURCE: I need to find a

First of all, here is the main Howard Miller Online Support and Download page with the links to the instruction manuals for all their clock models:

http://www.howardmiller.com/webapp/wcs/stores/servlet/GenericView1?langId=-1&storeId=12652&catalogId=13551#floorclock_inst


And here is a direct link to the ONLINE USER'S MANUAL for the Radio Controlled Clock model:

http://store.howardmiller.com/wcsstore/HowardMillerPublicSite/Attachment/625236_PD10727.pdf


To view the Support Page or the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the Owner's Manual.

You may need ADOBE READER installed on your computer to read PDF documents.
You can download this free at WWW.ADOBE.COM if necessary.
Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, the follow the onscreen instructions to install the software on your computer.

Please comment back here to this page if you have any details to add, have any questions, have difficulty accessing the links, or just require further general assistance and I will respond as soon as I see it.

Thank you very much and good luck.

Joe.

Posted on May 10, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a howard miller world time touch desk alarm clock


Here is a page that shows the table clocks. You might be able to find yours and then contact the manufacturer for the manual. Howard Miller Alarm Category

Nov 11, 2017 | Howard Miller Audio Players & Recorders

1 Answer

I purchased an older Howard Miller clock and the clock is keeping time but pendulum is barely moving. What do I do?


Hi Pam,
I have a Howard Miller Grandfather clock and the pendulum swings very slowly and from far left to far right travels only about three inches at best. It doesn't need to move any more than that to make the "Verge" move the "Escape Wheel" to rotate the gears to keep the hands moving at the correct tick. Howard Miller Grandfather Clock

Dec 06, 2016 | Home

1 Answer

Howard Miller Christopher Quartz mantel clock chime adjustment


Try pulling the batteries out, set the clock to 5:45 then put the batteries back in. Set the time to 6:00 and count how many times it strikes. If it strikes 6 then your good. If it strikes a different number say 5, take the batteries back out, and set the clock to 4:45 then put the batteries back it, set clock to 5 and count the strike. Most quartz clocks reset their chimes to 5:00 when new batteries are installed regardless of the time shown on the face. I hope this helps. Good Luck.

Nov 30, 2013 | Howard Miller Christopher Quartz Windsor...

1 Answer

How do you change the time zone on your Howard Miller Accuwave DS?


Press Mode then press Adjust till you get to the right time zone. Press Mode again.

May 18, 2011 | Howard Miller Techtime II 625236 Clock...

1 Answer

How do you change the time


need owner's manual for Howard Miller Model 625-259 atomic wall clock.

Nov 08, 2010 | Howard Miller 645-627 Clock Radio

1 Answer

I need a Howard Miller battery mantle clock


Try www.klockit.com. You can replace the entire movement for about $5 including new hands. You can select from an assortment of hands that will probably match the style of what you have and use those if the old hands don't fit the new movement. I've bought several movements from them over the years. For a few more dollars you can upgrade to an "atomic clock" movement which synchronizes with the US time signal and even sets DST automatically.

Apr 14, 2010 | Seiko Mantel Clock

1 Answer

Changed battery and now pendulum wont swing. Clock doesn't operate at all. All was fine until I changed the battery.


Give the pendulum a shove and do it every time you pass the clock. I got mine going from swinging for just 20 seconds to working permanently, at least until the next battery change.

Jul 07, 2009 | Howard Miller 645-627 Clock Radio

Not finding what you are looking for?
Howard Miller 613-528 Rosewood Bracket Logo

Related Topics:

760 people viewed this question

Ask a Question

Usually answered in minutes!

Top Howard Miller Home Experts

john h

Level 3 Expert

23515 Answers

Tom Chichester

Level 3 Expert

61131 Answers

Brad Brown

Level 3 Expert

18564 Answers

Are you a Howard Miller Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...