The light on the control board if blinking 6 times, how do I get rid of it? the light is saying VH VC. David Stowers

...and?

Google the model number with "error codes" or 6 blinks or as last resort call Samsung customer service

All blink codes indicate something wrong in the set and are only general in nature--will not of course say replace this specific part.

+4917677424185 Email Transcript [HVD] ====== Start time: 1/5/2012, 2:12:7 [HVD] Module HVD Log Version = 2,12,32,426 [HVD] OS Info 6 0 S 2 0 [VC] ====== Start time: 1/5/2012, 2:12:7 [VC] Module VC Log Version = 1,7,15,426 [VC] OS Info 6 0 S 2 0 [VC] ====== Start time: 1/5/2012, 2:12:7 [VC] Module VC Log Version = 1,7,15,426 [VC] OS Info 6 0 S 2 0 [YP] ====== Start time: 1/5/2012, 2:12:7 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] GetYoutubeURLType() = -1, http://www.facebook.com/people/Patricia-Geiss/100002655619425 [YP] ====== Start time: 1/5/2012, 2:12:7 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [HVD] ====== Start time: 1/5/2012, 2:12:9 [HVD] Module HVD Log Version = 2,12,32,426 [HVD] OS Info 6 0 S 2 0 [YP] GetYoutubeURLType() = -1, [email protected] [YP] GetYoutubeURLType() = -1, [email protected] [YP] ====== Start time: 1/5/2012, 2:12:12 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] InternetCrackUrl() = 12006, [email protected] [YP] WinHttpCrackUrl() = 12006, [email protected] [YP] GetYoutubeURLType() = -1, [email protected] [YP] GetYoutubeURLType() = -1, [email protected] [YP] ====== Start time: 1/5/2012, 2:12:51 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] InternetCrackUrl() = 12006, [email protected] [YP] WinHttpCrackUrl() = 12006, [email protected] [HVD] ====== Start time: 1/5/2012, 2:14:48 [HVD] Module HVD Log Version = 2,12,32,426 [HVD] OS Info 6 0 S 2 0 [VC] ====== Start time: 1/5/2012, 2:14:48 [VC] Module VC Log Version = 1,7,15,426 [VC] OS Info 6 0 S 2 0 [VC] ====== Start time: 1/5/2012, 2:14:48 [VC] Module VC Log Version = 1,7,15,426 [VC] OS Info 6 0 S 2 0 [YP] ====== Start time: 1/5/2012, 2:14:48 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] GetYoutubeURLType() = -1, http://www.facebook.com/people/Patricia-Geiss/100002655619425 [YP] ====== Start time: 1/5/2012, 2:14:48 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [HVD] ====== Start time: 1/5/2012, 2:14:49 [HVD] Module HVD Log Version = 2,12,32,426 [HVD] OS Info 6 0 S 2 0 [YP] GetYoutubeURLType() = -1, snc4/203372_100002655619425_1800818_n.jpg [YP] GetYoutubeURLType() = -1, snc4/203372_100002655619425_1800818_n.jpg [YP] ====== Start time: 1/5/2012, 2:14:51 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] InternetCrackUrl() = 12006, snc4/203372_100002655619425_1800818_n.jpg [YP] WinHttpCrackUrl() = 12006, snc4/203372_100002655619425_1800818_n.jpg [YP] GetYoutubeURLType() = -1, snc4/203372_100002655619425_1800818_n.jpg [YP] GetYoutubeURLType() = -1, snc4/203372_100002655619425_1800818_n.jpg [YP] ====== Start time: 1/5/2012, 2:15:11 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] InternetCrackUrl() = 12006, snc4/203372_100002655619425_1800818_n.jpg [YP] WinHttpCrackUrl() = 12006, snc4/203372_100002655619425_1800818_n.jpg [YP] GetYoutubeURLType() = -1, snc4/203372_100002655619425_1800818_n.jpg [YP] GetYoutubeURLType() = -1, snc4/203372_100002655619425_1800818_n.jpg [YP] ====== Start time: 1/5/2012, 2:15:15 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] InternetCrackUrl() = 12006, snc4/203372_100002655619425_1800818_n.jpg [YP] WinHttpCrackUrl() = 12006, snc4/203372_100002655619425_1800818_n.jpg

Add Your Solution Or Ask For Clarification

B200 means VH monitor error, your bring it to service center for repair. In most cases - defective control board

could b run capacitor bad, contactor not working properly, the code means a call for cooling but no high voltage present

need replaced A-BOARD
Manufacturer Panasonic Part Number TNPH0716ABS Description A- BOARD


After the installation of a new A board, unit has the characters "CHK" on screen. The usual reset procedures of [VOL -] and [MENU] or [OK] or [SLEEP] will not get rid of "CHK".

1. Enter the service mode by holding down the [VOL -] button on the TV (main unit) and simultaneously pressing the [INFO] button on the remote control three times.
2. Press the number [2] key on the remote to highlight [SRV-TOOL].
3. Press the [OK] button on the remote control to select [SRV-TOOL].
4. Use the [DOWN ARROW] on the remote control to scroll down to [PCTC].
5. Use the [RIGHT ARROW] button on the remote to open the box to the right, then press and hold down the [MUTE] button on remote to display Time/Count.
6. Press and hold the [RETURN] button on the remote control until the TV turns off.
7. Immediately press and hold down the [VOL -] button on the TV (main unit) and the [MENU] button on the remote. The TV should come up in the Self Check mode.
8. Remove AC power.

All I am looking for is the owners manual and a remote control for the VCR I purchased at Goodwill--Sharp model VC-H822.
Thank you and have a great day.
David

vC/vh Trip or code 6. The start cap and or the start relay is bleeding voltage to the comp in the off cycle. Replace both the cap and relay for the fix.

When you can your cover off your control panel look on panel for Troubleshooting lights. Sometimes the board itself has the codes. Low pressure or high pressue or maybe sensor failure. Different board diferent codes.

When a sony blinks 6 times that means a problem in the horizontal deflection circuitry. Check C515, C516 and the jungle IC !C206