The TV was working fine last night turned it off got up and turned it on in the morning did not work no power or nothing the TV is 11 years old but it is a H HD TV flat screen Panasonic

replace the power supply board inside tv

Try holding down the power button until it turns off and then turn it on again.

Now,tv on?.Tv "LAMP" LED light indication flashes or stay on?How long the Lamp been inside this tv,been inside like 1 1/2 or 2 years and tv been on each day like 4 or 5 hours a day in used.The lamp life are over.Should replace another lamp.

that is under warranty

This is just a shot - but it worked with my Sony (same problem).
Pressed remote power on button AND held Power button on TV on at the same time.

Set clicked 4 or 5 times and then came on....

Other, most have a (VERY small) reset switch on the rear - near where the power cord enters the TV... Use a flashlight and a mirror to locate it on your set....

If there is no power at all, then the problem is likely the power supply unit.
The PSU must be tested, then eventually replaced.

Dear,

can u do repairing or have you ever troubleshoot the issue by yourself.
if yes, then open the cover and check the continuety of the power cable because it can be the damage cable. if all of then check the fuse inside the circuit board where the main power cord goes. the must be a glass fuse. Check is it in working condition means having continuty too.
if this component is ok then u have to check the other circuitry.

regards,

6/1/2010 11:34:21 AM

Good morning I have sound problem it started with the cable hook up there box to the television, now sound is very low. Turn up the TV control to max, nothing but low sound. Of course cable people have no idea of a problem, I disconnected the cable but the same problem, love the set work for two years, note: thing happen when all analog change to digital. help!