How do I correct for daylight saving time in the US on the casio multiband 6

With most watches, use an Exacto knife to compress the pin to remove it. Replacing the pin is more difficult.

Today my 6-year old Waveceptor has adjusted itself to daylight Savings time without my intervention. I was agreeably surprised. For all the years I have had the watch, I kept the module manual by my side just for the two times a year I have to adjust the time.
All this to tell you that you imperatively have to read the module's manual. If you do not have it visit the Casio Worldwide web site and download it. You need the module number. You will find it on the back of the watch. It is a 4-digit number inside a rectangle.

Module No 5034 won't beep except for alarm use.

If your watch is exactly an hour out, then you need to set the daylight saving time (DST) via the mode button.

If this is not the case, then I cannot help you.

~Good luck

The solution is that I will take it back to the place I bought it, because the watch is nearly new.

Go here: http://world.casio.com/wat/download/en/manual/

put in your module number, and get the manual for your watch. I think it may have something to do with daylight savings time settings.

I need to change the current time. It does not change with daylight savings time, and I always have a problem setting it. Can you help me?

if you alowed some to play with the watch the could have turned off the daylight saving setting off.
casio offers this feture cuz some contries they sell watches in don't reconize daylight savings

Follow this link:
http://world.casio.com/wat/download/en/manual/

Rate me, please.

Download abridged instructions from casio @ http://world.casio.com/wat/download/en/manual