Screen not being displayed

visual-land.com/support_form.html

An LED TV is still an LCD TV, just with LED backlighting. That model is an LCD TV. The difference is in the backlight. Both LED and LCD TVs use an LCD screen. LED TVs have LED backlighting of the LCD screen, which saves energy.

kindly remove the screen protector sticker this will definately solve your problem

ur display is gone.....replace

check the connections with the display and the board

I think the problem is with the capacitor....you need to change the capacitor...

You are simply in blackout mode. This is so at night you aren't blinded by the glow of a screen. Here are instructions right from the manual to turn on or off.

Blackout Mode On and Off
When Blackout mode is turned on, the monitor display will turn off to
reduce power consumption.
This additional power enhances the sound quality.
1 Touch [VISUAL] on the main source screen.
The VISUAL selection screen is displayed.
2 Touch [OFF].
The backlit-display portion goes out.
3 Touch [OFF] again to cancel the display backlight.
• To make the setting, set to “Setting the VISUAL Touch Button” (page
34).
• If any button on the unit is pressed during Blackout mode, the
function will be displayed for 5 seconds to show the operation before
returning to Blackout mode.
• While the backlighting is turned off, the function indicator

just wait it, because it is processing the display data

Less than a year from buying date, then you must have a warranty from Nintendo so try contact their customer service and they should repair it for free.

Anyway if only the top screen then that problem might be a loosen top screen ribbon cable but you have to dismantle the unit to put it right in the connector and you gonna need tools and some video guides you can find in youtube.

If not enough confident about and dont have a warranty then take it to a repair shop.

Regards...

change the screen