Mobile not deteced on PC

If it's asking to be formatted you need data recovery help. For remote data recovery and do-it-yourself data recovery see http://FreeDataRecovery.us

First of all, you'd better recover all your files on usb. You can download a data recovery program, recommended asoftech data recovery as it helped me before. You can read more info about data recovery from
http://www.asoftech.com/adr/

After you get back all your files, you can try to format the usb. First check whether the usb is locked, and then you can try a low level format.

Insert your memory stick into your USB port go to my computor and see if it has been detected, if so right click on it and use the option format, this shall clear all your stored data but it wil restore your memory stick.

guess you are using a USB port to for that.....
1 - check the cable that connects the HD to the USB port...change the cable and verify
2 - connect to another PC and check if it's ok there
3 - bring another ext HD from a friend and try conencting that....check if that's OK
4 - there could be a corruption in the HD that is preventing the PC from reading it

cardinal rule for USB....not a very dependent device specialy if connecting thru USB data cables....
solution
always use a good qty USB data cable compatible with USB2....as some cheap cables are only for USB1

visit my website
www.sureshayyar.110mb.com
for more info on PC issue and solutions...
reg
Kris

Hi there connect the phone with PC via USB data cable then format the memory card. OR format the memory card from the phone and tell me what's going on. thanks.

format the card using a reader and try again

you need to have the correct settings call your provider they will send them via sms

how to connect mobile to PC via USB to share data

yes its possible. first install motorola phone tools on your computer. then configure the phone setting/connection/data/fax connection. then connect the phone with usb cable. then click default profile-ok. it detects your phone. when the phone appears in the right down side of your pc,then click connect to the internet button. cofigure the connection according to your service provider and continue the process. any further infomation contact with me at 008801714731453.

I think you will B OK, the Cable you use is BOTH comm's and batt charge the msg ya get is because batt charging is finishd.