Philips tv remote codes lists

Question edited for clarity.

No one buys Universal Remotes these days, they are so 1980! You buy a Facsimile Remote, an exact copy of the original like this one.

https://www.remotes.net/products/replacement-remote-for-nad-c720bee

https://www.google.com/search?q=remote+for+NADC720BEE

..

I would look the code up on the remote manufacturers web site list.

AVOL 4 digit codes:
2735 1820 3382 2051 2397 3118

AVOL 5 digit codes:
13118 13382 13479 12735 12051 12397 12278 11531

for every remote control device ever made since the beginning of remote control devices?

No problem, but next time, PLEASE give us some clues!

https://www.directutor.com/content/universal-remote-codes

..

wharfdale TVs are rebadged by Argos, so I am unsure of the actual manufacturer, and therefore the control signal scheme that they use.
It might help if you gave the model number of the particular TV, as they could be using several different manufacturers in their range of televisions.
it is unlikely there will be a single code that covers the whole range of Wharfdale Tvs

I have had very good luck with this site:

http://codesforuniversalremotes.com/

If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Brand: Apex Digital

Most likely code: 10765

Others to try:
10748, 10879, 10767, 10890, 11991, 10889
To program your remote:

1. Turn on your TV
2. Using the code list, find the first five digit code that is listed next to the name brand of the TV that is to be programmed
3. On the Comcast remote, press and release the TV key
4. On the Comcast remote, press and hold the SETUP key until the TV mode key blinks twice then release the SETUP key
5. On the Comcast remote, enter the first listed five digit code
   Note: If this number is entered correctly and is an accepted TV code, the TV mode key will blink twice. If the code is entered incorrectly or is not an accepted TV code, the TV mode key displays one long blink and exits programming mode
6. Aim the remote control at the TV and press the POWER key once
7. The TV should turn OFF - if it did not turn off, repeat steps 1-6 with the next TV code listed, until a working code is found

Hello

Magnavox TV codes with Comcast universal remote control are:-

?
11866, 10054, 10030, 10706, 11990, 11963, 11913, 11904, 11525, 11365, 11198, 10802, 10230, 10187, 10186, 10179, 10096, 10036, 10028, 10024, 10020

Philips TV codes with Comcast Universal remote control are:-
10054, 10037, 10690, 11483

?
1. Turn on the TV
NOTE: Please read steps 2 to 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.
2. Press and hold SETuntil the Red Light blinks twice, then release SET.
3. Locate the code for your device in Manufacturer's Codes on the back of this user guide. Brands are listed in alphabetical order with the most popular codes listed first.
4. Enter the first five-digit code for your TV. If you perform this procedure correctly, the Red Light will blink twice
NOTE: If you enter an invalid code, the red light will display one long blink and exit the programming mode. Repeat steps 2 to 5 with a valid code.
5. Aim the remote control at your TV and press Power once. The device should turn off. If it does not respond, repeat steps 2 to 4, trying each code listed for your brand until you find one that works. If it still does not work, try Searching For Your Code
OK.

HI,
Could you kindly give the exact model of the comcast remote that you are using.


Thanks
Proton