Question about Casio Sea-Pathfinder SPF40-1V Wrist Watch

1 Answer

Buttons on perimeter of pathfinder not functioning

Watch keeps time but no other functions working. Light will not come on. Top screen appears locked onto OP EN

Posted by Anonymous on

Ad

1 Answer

batteryBob

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

This watch must be returned to Casio service center for servicing, pressure test and complete tune-up.

Posted on Mar 04, 2015

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My casio pro trek 2894 is frozen it shows op en ontop and when i press the setting button it resets time to 12h00


Hi

Have you checked that all buttons when pressed come in and out easily?
Sometimes the little spindles that press the contacts inside the watch do not come out completely and remain "pressed" even if the button appears to be "out"
Clean the watch, with particular attention to the buttons area so they can move easily in and out. If this does not do the trick, open the watch with great care not to damage the threads on the plastic case and visiually inspect if the buttons travel easily in and out and that all springs if fitted are sound. Remove and replace the batteries with new ones (DO NOT use bargain batteries from that "auction site")
and reset the watch.Try again, if ok carefully clean the back seal apply a little vaseline to the top of the seal and close the case. DO NOT over tighten the screws as this will damage the plastic thread and the watch will not seal properly and will be likely to flood with moisture. Good luck

Jan 25, 2017 | Casio Watches

1 Answer

I have replace the batteries and after assembled the mode and adjust buttons are not functional.


I've had the same problem with another Casio watch and in my case I didn't place the inner parts of the watch exactly right. This must be done very precisely, otherwise one or more button functions don't work. Maybe it is worth a try to check the alignment of the inner parts of the watch.

Mar 15, 2015 | Casio Watch Sea Pathfinder Spf-60-1aver...

1 Answer

Casio pathfinder battery operated watch keeps blanking out display?


Your watch is solar powered, so I think it isn't charged lately. At a low charge, the watch goes into saving mode by switching off the display (while keeping the time, date, etc.). To charge the watch leave it in a brightly lit spot for a day or two. That should be enough to make the watch function as normal again.

For more information, you can download the manual of your watch here (direct download link):
Timepieces Watches Manuals CASIO

Jun 11, 2014 | Casio Pathfinder PAG60-1AV Watch

1 Answer

My Casio protrek prg 60 1aver is stuck in time mode. When I press any of the buttons they do not activate the required function. The charge indicator has been been stuck on 'M' for days. I have...


probably one of the buttons of your watch is stuck that's why you cannot use the other buttons of your watch. it has to be opened and check for it, mostly of the button that are stucked with this kind of watch is the illuminator or the light located at the lower middle of your watch. i hope i had helped you.

Jul 25, 2011 | Casio Triple Sensor Pathfinder PRG60-1AV...

1 Answer

Casio PAW-1200T Tough Solar Pathfinder watch says OPEN. Watch has never been opened, and solar battery has full charge. Nothing works but the basic time and the light.


so here is the fix if you get op en display on your casio pathfinder or whatever model. mine happens to be a paw 1200t
1. you gotta break it open 2 pins each side band comes off.
2. pry off the side pieces. this exposes 4 screws.
3. the base then comes off be careful of the gasket.
4. once inside. notice a round circular object on the base and a small oval shiny gold copper piece.
5. For whatever reason the shiny copper piece has shifted and does not make contact with the tiny little springs there are 2 if you shift the base to make contact with the gold piece the op en goes away and watch is back to normal.
6. the fix is move this little piece back to where it belongs. i got lucky and the glue still held when i firmly moved it to its original location. super glue came to mind if it wont stay where it belongs.

7. gasket orientation and cleaning out the gasket channel is a given i used welding tip cleaners to do the intricate work. under the bands are very grungy. mine is about 5-6 years old. reassemble the way it came out.

if your battery is good and you get this op en look to your display for whatever reason this worked for me and if casio uses this as a warranty or warning of water coming in your watch it was a STUPID DUMB IDEA. those springs should be solid state and the watch is useless until it is fixed no light, no baro, no alt, no comp. notta and no buttons work. there is no reason whatsoever that this shiny copper thing shifts but it happened to me and my watch is working and my battery has had H or full power since day one.

Apr 11, 2011 | Casio Triple Sensor Pathfinder PRG60-1AV...

1 Answer

My son has a Calypso watch model no. k55506/2 We have a problem to set the time. I search for Calypso and keep getting directed to Casio. Is a Calypso watch a Casio model? That's no problem. The...


This also drove me crazy. But I figured it out:
1. Hold the top left button down until "LIGHT" appears at the top; now you are in the setting more. you can turn the light function on or off by pressing either of the right hand buttons.
2. Then, just keep pressing the bottom left button to toggle through each of the settings (date, hour, minutes, etc.); and use the same right hand buttons to set them as needed.
3. When you're done, press the top left button again to complete your settings.

Mar 16, 2011 | Casio Baby-G BG370S-4V Wrist Watch

1 Answer

I have purchased a PROTREK 3246 i am unable to set my city and latitude longitude the city is srinagar (J & K)


hi nothing of the function is responding in the watch and the word (op en)n in the place of the date

Jan 28, 2011 | Casio Protrek Triple Sensor PRG80L2VDR WW...

1 Answer

I just bought a Kenneth Cole Unlisted mens watch. There is no instructions on how to set the day and date. Is it broken out of the box or are those dials just fakes? Jens


The Mode button on the bottom left hand side will set your "SET" buttons to work.

The first push of your Mode button will activate your Stop Watch. Press the top right button to time your subject. Press it again to stop timing your subject.

Pressing the bottom right button will reset your Stop Watch to zero.

Press the Mode button to release your Stop Watch function and return to the Telling Time function.

Press the Mode button twice and you'll be able to set your Alarm function. Your Hour number will be flashing. Press the top right button to set your Alarm Hour. If you Alarm Hour is for the afternoon or evening continue pushing until a "P" appears by your hour number . This will be your afternoon/evening hour. If there is no "P" that, of course, will be your morning hour.

Press the bottom right button to adjust the minute number of your Alarm function. Your minute number will be flashing. Again, using the top right button, you'll be able to adjust your minute number.

(If you hold any number changing button for a long time, the numbers will flash through rapidly.)

Press the mode button to release your Alarm setting function.

Press the Mode button three times to set the Time of Day on your watch. At this point you'll also need to push the bottom left button to activate your Time of Day function. after pressing the bottom right button your minute number will start flashing. Press the top right button again to adjust your minute number. Once that's done, press the mode button to release your time of day function.

Hope this helps!

Oct 18, 2010 | Kenneth Cole Watches

3 Answers

I need help setting the time and date on my Adidas Plastic Peachtree watch ADH4012 900912 can someone please help!!!!


A- Top right B- Bottom right C- Bottom left D- Top left Press C button until you get to the time screen. When the time screen appears press and hold down the D button. The light on screen appears, Press C and the chime on screen appears, Press C again and you can start setting the time using the A and B button. When finished press the D button.

Jul 16, 2010 | Adidas PEACHTREE watch

Not finding what you are looking for?
Casio Sea-Pathfinder SPF40-1V Wrist Watch Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Ekse

Level 3 Expert

13434 Answers

Bruce Robin

Level 2 Expert

300 Answers

Are you a Casio Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...